E2E-X3D1-U 2M: Two Wire Proximity Switch in Chennai
The Technical Specification of Omron E2E-X3D1-U 2M Two Wire Proximity Switch:
- Sensor Head (Dia): M12
- Installation: Flush | Shielded
- Sensing Distance: 3 mm
- Connection Method: Pre-wired Models
- Cable Specifications: PUR (increased oil-resistant)
- Switching: NO
- Output Configuration: DC 2 Wire
- Response Frequency: 1 kHz
- Power Supply Voltage: 12 to 24 VDC
Omron E2E-X3D1-U 2M Two-Wire Proximity Switch Technical Specification:
Sensor Head (Dia) | M12 |
Installation | Flush | Shielded |
Sensing Distance | 3 mm |
Connection Method | Pre-wired Models |
Cable Specifications | PUR (increased oil-resistant) |
Switching | NO |
Output Configuration | DC 2 Wire (No Self-diagnostic Output) |
Differential travel | 15% max. of sensing distance |
Detectable object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
Standard sensing object | Iron, 12 × 12 × 1 mm |
Response frequency | 1 kHz |
Power supply voltage | 12 to 24 VDC, ripple (p-p): 10% max. (10 to 30 VDC) |
Leakage current | 0.8 mA max |
Indicator | Operation indicator (red) and setting indicator (green) |
Protection circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
Ambient air temperature | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
Ambient humidity | Operating/storage: 35% to 95% (with no condensation) |
Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant |
Material Case | Stainless steel (SUS303) |
Material Sensing surface | PBT |
Looking for Omron E2E-X3D1-U 2M, you can find the best rates for this sensor, featuring M12 diameter, shielded installation, 3 mm sensing distance, pre-wired models, DC Two Wire Proximity Switch configuration, PUR cable, 12 to 24 VDC power supply, and a normally open switch (NO). Get reliable inductive sensing with favorable pricing from IndMALL Automation for the Omron sensors in Chennai.