Omron E2E-X10D1-M1GJ Proximity Sensor
Omron E2E-X10D1-M1GJ is a cylindrical M30 shielded inductive proximity sensor with a 10 mm sensing distance and 0 to 8 mm setting distance. It provides a DC 2-wire NO output through an M12 standard pre-wired connector and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.4 kHz, while control output is rated from 3 to 100 mA with a 50 mA diagnostic output. Red and green indicators show operation and setting status. The E2E-X10D1-M1GJ is listed among M30 DC 2-wire proximity sensors from Omron sensing and control products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X10D1-M1GJ |
Omron E2E-X10D1-M1GJ Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Housing Shape | Cylindrical |
| Size | M30 |
| Mounting type | Shielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output configuration | DC 2-wire |
| Operation Mode | NO |
| Connection Method | M12 Standard Prewired Connector |
| Cable specifications | PVC (oil-resistant) |
| Wire color / pin arrangement | 1: +V, 4: 0 V |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 30 × 30 × 1 mm |
| Response Frequency | 0.4 kHz |
| Power Supply Voltage | 12 to 24 VDC |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Degree of Protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Control Output | 3 to 100 mA, Diagnostic output: 50 mA |
| Indicators | Operation indicator (red) and setting indicator (green) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 110 g |
The Omron E2E-X10D1-M1GJ Proximity Sensor uses a cylindrical M30 shielded inductive sensing body with a 10 mm sensing distance and a 0 to 8 mm setting distance. It provides a DC 2-wire NO output through an M12 standard pre-wired connector and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.4 kHz. Control output is rated from 3 to 100 mA, while diagnostic output is rated 50 mA. Red and green indicators show operation and setting status, and surge suppression plus load short-circuit protection are specified.
Operating conditions for the E2E-X10D1-M1GJ extend from -25 to 70°C, while storage covers -40 to 85°C without icing or condensation. IEC 60529 IP67 and an in-house oil-resistant rating are specified. The shielded M30 configuration combines a 10 mm sensing distance with DC 2-wire normally open switching. Its M12 standard pre-wired connector provides detachable installation while retaining a cabled interface. Nickel-plated brass, PBT, zinc-plated iron, and PVC are listed among the construction materials. The diagnostic output provides an additional signal alongside the main switching circuit. For another connector-type E2E sensor with an M18 body and 14 mm sensing distance, see E2E-X14MD1-M1.
