Omron E2B-M18KN10-M1-B1 Proximity Sensor
Omron E2B-M18KN10-M1-B1 is an M18 unshielded inductive proximity sensor with a 10 mm sensing distance, a 0 to 8 mm setting distance, and a short-body design. It uses a PNP output with NO operation and an M12 connector, supported by a 10 to 30 VDC power-supply range. Ferrous metal is listed as the detectable object, with a 30 × 30 × 1 mm standard sensing object. Response frequency is 400 Hz, current consumption is 10 mA max., and differential travel is 10% max. of sensing distance. The model also includes a yellow operation LED and protection against reverse polarity, surges, and short circuits. The E2B-M18KN10-M1-B1 belongs to the Proximity sensor category from Omron sensor products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2B-M18KN10-M1-B1 |
Omron E2B-M18KN10-M1-B1 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting | Unshielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Body Length | Short body |
| Output Configuration | PNP |
| Operation Mode | NO |
| Connection | M12 connector |
| Power Supply Voltage | 10 to 30 VDC |
| Body Material | Brass |
| Standard Target | 30 × 30 × 1 mm |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 400 Hz |
| Current Consumption | 10 mA max |
| Indicator | Operation indicator (Yellow LED) |
| Protection Circuit | Output reverse polarity protection, Power source circuit reverse polarity protection, Surge suppressor, Short-circuit protection |
| Ambient Temperature Range | Operation and storage : -25 to 70ºC (with no icing or condensation) |
| Ambient Humidity Range | Operating: 35% to 95%, Storage: 35% to 95% |
| Insulation Resistance | ±10% max. of sensing distance at 23ºC within temperature range of -10 to 55ºC ±15% max. of sensing distance at 23ºC within temperature range of -25 to 70ºC |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current carry parts and case |
| Vibration Resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y and Z directions |
| Shock Resistance | 1,000 m/s2, 10 times each in X, Y and Z directions |
| Voltage Influence | ±1% max. of sensing distance in 24 V ±15% |
| Degree Of Protection | IP67 |
| Weight | Approx. 60 g |
The Omron E2B-M18KN10-M1-B1 Proximity Sensor is an M18 unshielded inductive model with a 10 mm sensing distance, a 0 to 8 mm setting distance, and short-body construction. Its switching output is PNP with NO operation, and an M12 connector is used for connection. The sensor operates from a 10 to 30 VDC power supply and draws 10 mA max. current. Ferrous metal is the listed detectable object, with a 30 × 30 × 1 mm standard sensing object. Differential travel is 10% max. of sensing distance, response frequency is 400 Hz, and a yellow LED indicates operation for the specified PNP NO output state.
Output reverse-polarity protection, power-source circuit reverse-polarity protection, surge suppression, and short-circuit protection are included. The operating and storage temperature range is -25 to 70°C without icing or condensation, while humidity is 35% to 95%. Temperature influence is ±10% max. of sensing distance at 23°C from -10 to 55°C and ±15% max. from -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, and dielectric strength is 1,000 VAC for 1 minute. The sensor carries an IP67 degree of protection. For the corresponding E2B M18 KN10 configuration with a pre-wired 2 m connection, see E2B-M18KN10-WP-B1 2M.
