Omron D4C-3324 Limit Switch
Omron D4C-3324 is differentiated by its high-sensitivity roller lever and 5 m oil-resistant VCTF cable. The actuator is intended for switching with smaller mechanical movement, while the longer cable gives more wiring reach than the 3 m versions in the same series. Its electrical rating is 4 A at 30 VDC, making the model suitable for DC control requirements that need sensitive roller-lever actuation. The D4C-3324 belongs to the D4C Series within the high-sensitivity roller lever switch range from Omron automation components, with actuator sensitivity and cable length being the main selection points for this version.
| Brand | Omron |
| Product | Limit Switch |
| Model Number | D4C-3324 |
Omron D4C-3324 Limit Switch – Technical Specifications
| Specification | Value |
|---|---|
| Electrical Ratings | 4 A at 30 VDC |
| Cable Specifications | VCTF oil-resistant cable |
| Cable Length | 5 m |
| Actuator | Roller lever, high-sensitivity |
The Omron D4C-3324 Limit Switch is identified by a high-sensitivity roller lever rather than a standard lever or plunger actuator. This high-sensitivity configuration is the main reason to select the model when a smaller amount of actuator travel is required to produce switching. Its electrical rating is 4 A at 30 VDC. A 5 m VCTF oil-resistant cable is supplied with the switch, so the D4C-3324 also provides more wiring reach than comparable versions fitted with 3 m leads. These two characteristics—sensitive lever operation and 5 m cable length—define the model more clearly than generic D4C Series specifications.
The source does not provide IP rating, operating temperature, contact resistance, durability, or shock values for this specific row, so those specifications are not carried over from other D4C models. Selection should therefore stay focused on the information actually given: roller-lever sensitivity, 4 A at 30 VDC rating, and prewired 5 m oil-resistant cable. This configuration is useful to compare against a standard center roller lever when deciding whether actuator response or lever geometry is the more important requirement. For that comparison, the D4C-3360 provides a center roller lever while retaining a 5 m cable and the same stated 30 VDC rating.
