Fotek Flow Meter - KTC, KI & ATF Flow Meters
Fotek flow meters are industrial instruments used to measure volumetric or mass flow rates in pipelines systems accurately continuously. They operate using established measurement principles such as electromagnetic, turbine, vortex, ultrasonic, or thermal sensing to convert fluid movement into proportional electrical signals for monitoring liquids or gases under defined process conditions. Selection is based on fluid type, flow range, pipe diameter, operating pressure, temperature limits, measurement principle, accuracy requirement, output signal type, power supply, installation orientation, and compliance with industrial process instrumentation standards. Fotek flow meters are industrial flow measurement devices, inline or insertion mounted, classified by sensing technology and fluid compatibility, interfacing through analog or digital outputs to integrate with control systems and instrumentation networks within standardized industrial automation architectures.
Fotek Flow Meter: KT &AT Series
Accuracy: Offers high accuracy of less than ±0.5%.
Customization: Features customizable pulse rate (K-factor) and unit selection for flow total meters (Liters, Gallons, Kilo-liters).
Versatility: Includes changeable status for flow rate meter limit output (Normally Open/ Normally Closed).
Installation Flexibility: The AT series display unit can be installed in four different directions, enhancing adaptability.
Output Options: Available with NPN pulse output, transmitter options (420mA or 05V), and optional RS-485.
Fotek Flow Meters: KTC Series
Low battery detection and energy-saving mode options.
Display units for flow rate and total flow with multiple measurement units (GPM, LPT, CMH for rate; GAL, LTR, CMH for total).
Capability to reset the flow total meter for security.
Installation flexibility with four directional display options.
Data retention during battery replacement.
Flow rate meter equipped with an alarm display for monitoring purposes.
Fotek Flow Meter KI Series
Gas-proof structure suitable for corrosive environments.
High accuracy with less than ±0.5% deviation.
Customizable pulse rate (K-factor) and selectable flow total meter units (Liter, Gallon, Kilo-liter).
Adjustable flow rate meter limit output status (Normally Open/Normally Closed).
Selectable unit of pulse (LPP, GPP, KLPP).
Power on delay time settings for flow rate meter limit output.
Fotek Flow Meter ATF Series
Measurement accuracy of ±2.0% of full scale.
Dual functions as a flow rate meter and a flow total meter.
Optional outputs including RS-485, transmitter, or alarm.
Multi-function capabilities for versatile application needs.
Veda Instrument
Deals in PAN India
The Fotek Flow Meter range offers precision measurement solutions for various fluid handling applications. This includes models like the KT & AT Series, known for their high accuracy and customizable output options, and the KTC Series, which features energy-saving modes and multi-directional installations. These meters are designed to provide detailed flow rate monitoring with the ability to adjust the measurement units and pulse outputs to suit specific needs. Ideal for industries requiring accurate flow measurement, these devices ensure efficient operation and are equipped with features like alarm systems for enhanced monitoring.
What is the normal range of flow meter?
The normal range of a flow meter can vary widely depending on the specific type and application. Common ranges for liquid flow meters might start from as low as a few milliliters per minute up to thousands of liters per minute. For gas flow meters, the range could be from a few cubic feet per minute to hundreds of cubic feet per minute. The design and calibration of the flow meter dictate its optimal operating range to ensure accuracy and efficiency in flow measurement.
How do flow meter sensors work?
Flow meter sensors work by embedding electrodes on opposite sides of a pipe. These electrodes create a magnetic field across the liquid flow path. As the liquid flows through this magnetic field, it induces a voltage that is sensed by the electrodes. The strength of this induced voltage is proportional to the flow rate of the liquid, allowing electromagnetic flow meters to measure it with high accuracy. This method is especially effective in measuring the flow rates of conductive liquids.
What is the flow rate of a flow meter?
The flow rate of a flow meter measures the volume of fluid passing through a specific point per unit of time. This measurement can involve various types of fluids, such as water, gas, or steam, moving through a pipe. Volumetric flow meters, a common type of flow meter, are crucial in accurately determining the amount of fluid moving through the system, which is essential for processes in industries like manufacturing, utilities, and energy production.
Find the right Fotek Flow Meter for your industry needs at IndMALL.