Many procurement teams check DPDM-32 against Festo Festo, Festo Dsnu 25 50 P A 19221 and Festo Valves before signing purchase orders, verifying quality, compliance, and after-sales support availability.
Festo DPDM-32 Pneumatic Cylinder
The Festo DPDM-32 Pneumatic Cylinder offers Double-acting; Pushing; Single-acting; Pulling operation, G1/8 connection, 32 mm diameter, andPiston; Piston rod; Profile barrel. Manufactured by Festo under the Festo Pneumatic Cylinder category, this model belongs to the DPDM Series.

| Brand | Festo |
| Product Type | Compact Cylinder |
| Product | DPDM-32 |
Festo DPDM-32 Pneumatic Cylinder – Technical Specifications
| Specification | Value |
|---|---|
| Stroke | 5; 50 |
| Piston diameter | 32 mm |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Mounting position | optional |
| Mode of operation | Double-acting; Pushing; Single-acting; Pulling |
| Design | Piston; Piston rod; Profile barrel |
| Position detection | Via proximity switch |
| Variants | Metals with copper, zinc or nickel by mass as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils.; Through piston rod; Through, hollow piston rod; Heat-resistant seals max. 120°C; Piston rod at one end |
| Protection against torque/guide | Guide rod with yoke |
| Operating pressure | 1; 8 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Corrosion resistance class CRC | 0 - No corrosion stress; 1 - Low corrosion stress; 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B2-L |
| Cleanroom class | Class 6 according to ISO 14644-1 |
| Ambient temperature | -10; 120 |
| Type of mounting | Either:; With through-hole; Via female thread |
| Pneumatic connection | G1/8 |
| Note on materials | RoHS-compliant |
| Material cover | Wrought aluminium alloy |
| Material housing | Anodised wrought aluminium alloy |
| Material piston rod | High-alloy stainless steel |




