Home Products Capacitive Sensors di-soric KNS M12KM 8N G3-B3 Di-soric KNS M12KM 8N G3-B3 Proximity Sensor The Di-soric KNS M12KM 8N G3-B3 Proximity Sensor offers Thread design, non-flush installation type, Push-pull, 100 mA, NO/NC, switchable via IO-Link output, andConnector, M12, 3-pin, A-coded connection. Manufactured by Di-soric under the Di-soric Proximity Sensor category, this model belongs to the KNS Series.
Brand Di-soric Product Type Proximity Sensor Model Number KNS M12KM 8N G3-B3
Di-soric KNS M12KM 8N G3-B3 Proximity Sensor - Technical Specifications Specification Value Operating principle Capacitive Design Thread Service voltage 18 … 30 V DC No-load current (max.) 15 mA (24 V DC) Insulation voltage endurance 500 V Installation type non-flush Thread M12 x 1 Housing length 49 mm Housing material Brass (nickel-plated) Protection class III, operation on protective low voltage Switching output Push-pull, 100 mA, NO/NC, switchable via IO-Link Voltage drop (max.) 2 V Interface IO-Link Switching distance (SN) 8 mm (0.3 to 12 mm adjustable via IO-Link) Standardized measuring plate 24 x 24 mm Switching hysteresis (max.) < 15 % Sensitivity adjustment IO-Link Display LED yellow - Output signal Switching frequency (factory setting) 100 Hz (STANDARD) Readiness delay (max.) 300 ms Shock/vibration load 30 g, 10 … 55 Hz / 0.5 mm Ambient temperature during operation -20 … +70 °C Protection type IP 65 / IP 67 Connection Connector, M12, 3-pin, A-coded Material PBT (Sensor probe) Weight 11 g
