Procurement managers rarely finalize KNS-M08KM-3N-G3-T3 without reviewing Di Soric Magnetic Sensors, Di Soric Kns M12M 04B G3 B3 and Turck Capacitive Sensors, ensuring that the chosen component meets budget, compliance, and delivery conditions.
Di-soric KNS M08KM 3N G3-T3 Proximity Sensor
The Di-soric KNS M08KM 3N G3-T3 Proximity Sensor offers Thread design, non-flush installation type, Push-pull, 100 mA, NO/NC, switchable via IO-Link output, andConnector, M8, 3-pin, A-coded connection. Manufactured by Di-soric under the Di-soric Proximity Sensor category, this model belongs to the KNS Series.
| Brand | Di-soric |
| Product Type | Proximity Sensor |
| Model Number | KNS M08KM 3N G3-T3 |
Di-soric KNS M08KM 3N G3-T3 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Operating principle | Capacitive |
| Design | Thread |
| Service voltage | 18 … 30 V DC |
| No-load current (max.) | 15 mA (24 V DC) |
| Insulation voltage endurance | 500 V |
| Installation type | non-flush |
| Thread | M8 x 1 |
| Housing length | 47.9 mm |
| Housing material | Brass (nickel-plated) |
| Protection class | III, operation on protective low voltage |
| Switching output | Push-pull, 100 mA, NO/NC, switchable via IO-Link |
| Voltage drop (max.) | 2 V |
| Interface | IO-Link |
| Switching distance (SN) | 3 mm (0.2 to 4 mm adjustable via IO-Link) |
| Standardized measuring plate | 12 x 12 x 1 mm |
| Switching hysteresis (max.) | < 15 % |
| Sensitivity adjustment | IO-Link |
| Display | LED yellow - Output signal |
| Switching frequency (factory setting) | 100 Hz (STANDARD) |
| Readiness delay (max.) | 300 ms |
| Shock/vibration load | 30 g, 10 … 55 Hz / 0.5 mm |
| Ambient temperature during operation | -25 … +70 °C |
| Protection type | IP 65 / IP 67 |
| Connection | Connector, M8, 3-pin, A-coded |
Related Products
