In most procurement cycles, KNS-D6-5M-03N-G3-T3 is considered with Di Soric Inductive Sensor, Di Soric Kns M12M 04B G3 B3 and Turck Capacitive Sensors, giving decision-makers confidence that they’ve chosen the most dependable component.
Di-soric KNS D6.5M 03N G3-T3 Proximity Sensor
The Di-soric KNS D6.5M 03N G3-T3 Proximity Sensor offers Cylinder design, non-flush installation type, Push-pull, 100 mA, NO/NC output, andConnector, M8, 3-pin connection. Manufactured by Di-soric under the Di-soric Proximity Sensor category, this model belongs to the KNS Series.
| Brand | Di-soric |
| Product Type | Proximity Sensor |
| Model Number | KNS D6.5M 03N G3-T3 |
Di-soric KNS D6.5M 03N G3-T3 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Operating principle | Capacitive |
| Design | Cylinder |
| Service voltage | 18 … 30 V DC |
| No-load current (max.) | 15 mA (24 V DC) |
| Insulation voltage endurance | 500 V |
| Installation type | non-flush |
| Housing length | 59.5 mm |
| Housing material | Stainless steel |
| Protection class | III, operation on protective low voltage |
| Switching output | Push-pull, 100 mA, NO/NC |
| Voltage drop (max.) | 2.4 V |
| Switching distance (SN) | 3 mm (0.1 to 4 mm adjustable) |
| Standardized measuring plate | 8 x 8 x 1 mm |
| Switching hysteresis (max.) | 15 % |
| Sensitivity adjustment | Potentiometer (11-turn) |
| Display | LED yellow - Output signal |
| Readiness delay (max.) | 300 ms |
| Ambient temperature during operation | -25 … +70 °C |
| Protection type | IP 65 / IP 67 |
| Connection | Connector, M8, 3-pin |
| Material | PPS (Sensor probe) |
| Switching frequency | 100 Hz |
| Diameter | Ø 6.5 mm (Diameter) |
| Weight | 10 g |
Related Products
