If you’re not fully sure about DCCQ-08-M-04-10-AK, taking a closer look at IFM Proximity Sensor, Di Soric Insm Q05 B0 8Po 2C and Omron Proximity Sensor Suppliers In Patna often helps compare reliability, cost, and availability.
Di-soric DCCQ 08 M 04/10 AK Proximity Sensor
The Di-soric DCCQ 08 M 04/10 AK Proximity Sensor offers Cuboid design design, output, andCable, 2.0 m (flying leads) connection. Manufactured by Di-soric under the Di-soric Proximity Sensor category, this model belongs to the DCC Series.
| Brand | Di-soric |
| Product Type | Proximity Sensor |
| Model Number | DCCQ 08 M 04/10 AK |
Di-soric DCCQ 08 M 04/10 AK Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Product series | INA Analog |
| Operating principle | inductive |
| Design | Cuboid design |
| Installation type | quasi-flush |
| Internal power consumption | 10 mA |
| Switching distance (SN) | 0 … 4 mm |
| Standardized measuring plate | 12 x 12 x 1 mm |
| Service voltage | 15 … 30 V DC |
| Insulation voltage endurance | According to IEC 60947-5-2 (7.2.3.1) |
| Housing length | 59 mm |
| Housing height | 8 mm |
| Housing width | 8 mm |
| Housing material | Brass (CuZn, nickel-plated) |
| Protection class | III, operation on protective low voltage |
| Ambient temperature during operation | -25 … +70 °C |
| Protection type | IP 67 |
| Connection | Cable, 2.0 m (flying leads) |
| Material of cable | Polyurethane |
| Characteristics | extremely high operating distance |
| Switching hysteresis (max.) | 5 % |
| Switching frequency | 1600 Hz |
| Tightening torque | 4 Nm |
| Housing dimensions | 8 x 8 mm |
| Analog output | 0 … 10 V |
