DVP20PM00M: Delta PLC Standard Motion Controller
The Technical Specifications of Delta PLC Standard Motion Controller DVP20PM00M:
- Series: Delta DVP-PM Series
- Built-in: 16 I/O points. Max. 512 I/O points
- Program capacity: 64k steps
- Data register: 10k words
- Fuse capacity: 2A/250 VAC
- Power Supply Voltage: 100 ~ 240VAC
- Operating Temperature: 0°C ~ 55°C
- Built-in 2 groups: A/B phase differential signal output
Delta PLC Standard Motion Controller DVP20PM00M Technical Specifications:
Built-in | 16 I/O points. Max. 512 I/O points |
Output Type | Transistor |
Power supply voltage | 100~240VAC (-15%~10%), 50 / 60Hz ±5% |
Fuse Capacity | 2A/ 250VAC |
Program capacity | 64K Steps |
Data register | 10k words |
Built-in A/B phase differential signal outputs: | 2 sets |
Spike Voltage Durability | 1500VAC (Primary-secondary); 1500VAC (Primary-PE); 500VAC (Secondary-PE) |
Insulation Impedance | >5 MΩ (all I/O point-to-ground: 500VDC) |
Noise Immunity | ESD: 8 kV Air Discharge EFT: Power Line, 2 kV Digital I/O: 1 kV Analog & Communication I/O |
Earth | The diameter of the grounding wire shall not be shorter than that of the power supply cable. (When many PLCs are in use at the same time, please make sure every PLC is properly grounded.) |
Storage /Operation Temperature | Storage: -25ºC ~70ºC (temperature) Operation: 0ºC ~55ºC (temperature) |
Storage /Operation humidity | 5%~95% (humidity) 5%~95% (humidity); pollution degree 2 |
Max. differential output frequency | 500 kHz |
HSC | 200KHz*2 |
Input Signal Voltage | 24VDC ±10% (5 mA) |
Power consumption | 60 VA |
Looking for the Delta PLC Standard Motion Controller DVP20PM00M from the DVP-PM Series is a solid choice. It comes with 16 built-in I/O points and can expand up to 512. This controller has a 64k step program capacity and a 10k word data register. It uses a 2A/250 VAC fuse and consumes 60 VA power, operating on a 100-240 VAC supply. Designed to work between 0°C and 55°C, it also features 2 groups of A/B phase differential signal output. For competitive prices, check out IndMALL Automation.