In most procurement cycles, ITD-40-A-4 is considered with Siemens Encoder, Baumer Photoelectric Sensor and Baumer Eb360 Sc C S012 V4Gjn 13000N, giving decision-makers confidence that theyβve chosen the most dependable component.
ITD 40 A 4: N/A - Baumer Thalheim Incremental Encoder
Technical Specifications of Baumer Thalheim Incremental Encoder ITD 40 A 4:
| Voltage supply | 5 VDC Β±5 %, 8...30 VDC |
| Sensing method | Optical |
| Size (flange) | ΓΈ80 mm |
| Connection | Cable 1 m |
Baumer Thalheim Incremental Encoder ITD 40 A 4 N/A Technical Specifications:
| Specification | Value |
|---|---|
| Voltage supply | 5 VDC Β±5 %, 8...30 VDC |
| Consumption w/o load | β€100 mA |
| Pulses per revolution | 200 β¦ 2048 |
| Reference signal | Zero pulse, width 90Β° |
| Sensing method | Optical |
| Output frequency | β€120 kHz |
| Output signals | A, B, N + inverted |
| Output stages | TTL linedriver (short-circuit proof), HTL push-pull (short-circuit proof) |
| Size (flange) | ΓΈ80 mm |
| Shaft type | ΓΈ10...16 mm (blind hollow shaft) |
| Protection EN 60529 | IP 65 |
| Operating speed | β€8000 rpm, β€5000 rpm IP 65 (>70 Β°C) |
| Starting torque | β€0.01 Nm (+20 Β°C) |
| Material | Housing: aluminium, black, powder-coated, Shaft: stainless steel |
| Operating temperature | -20...+70 Β°C, -20...+100 Β°C |
| Relative humidity | 90 % non-condensing |
| Resistance | EN 60068-2-6, Vibration 10 g, 55-2000 Hz, EN 60068-2-27, Shock 100 g, 11 ms |
| Connection | Cable 1 m |
| Weight approx. | 550 g |
Give Us a Call for Baumer Thalheim Incremental Encoder ITD 40 A 4 at the lowest pricing. In-depth Technical Analysis of ITD 40 A 4, feature voltage supply of 5 VDC Β±5 %, 8...30 VDC and a low power consumption of β€100 mA without load. These encoders use Optical sensing for accurate measurement and provide output frequencies of β€120 kHz. The available output stages include TTL linedriver (short-circuit proof), HTL push-pull (short-circuit proof). The encoders feature a ΓΈ80 mm flange size and operate at speeds of up to β€8000 rpm, β€5000 rpm IP 65 (>70 Β°C). The Housing: aluminium, black, powder-coated, Shaft: stainless steel. Connection options include Cable 1 m. The approximate weight is 550 g. Elevate Your Project with a Quote for your requirement of Baumer Thalheim Incremental Encoder. Our promise: More affordable pricing and more personalized support than other Distributors & Dealers.
