Procurement managers rarely finalize HS35F without reviewing Siemens Encoder, Baumer Photoelectric Sensor and Baumer Eb360 Sc C S012 V4Gjn 13000N, ensuring that the chosen component meets budget, compliance, and delivery conditions.
HS35F: 11076339 - Baumer Draw Wire Encoder
Technical Specifications of Baumer Draw Wire Encoder HS35F:
| Voltage supply | 4.75...30 VDC |
| Sensing method | Optical |
| Size (flange) | ø3.15" (ø80 mm) |
| Connection | MIL-connector, 7-pin, MIL-connector, 10-pin, Cable (AWG26 wire) |
Baumer Draw Wire Encoder HS35F 11076339 Technical Specifications:
| Specification | Value |
|---|---|
| Voltage supply | 4.75...30 VDC |
| Consumption w/o load | ≤40 mA (24 VDC), ≤130 mA (4.75 VDC) + output load, max. 250 mA |
| Pulses per revolution | 1024 … 80000 |
| Sensing method | Optical |
| Output frequency | ≤300 kHz (TTL), ≤160 kHz (HTL) |
| Output signals | A, B, Z, A, B, Z + complement, ½ cycle index gated with negative B channel |
| Output stages | Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof, Push-pull (HTL, 7272) Vout = Vin, short-circuit proof |
| Size (flange) | ø3.15" (ø80 mm) |
| Shaft type | ø0.375...1" (ø9.525...25.4 mm) (through hollow shaft isolated) |
| Protection EN 60529 | IP 54, IP 65, IP 67 |
| Operating speed | ≤5000 rpm (see temperature diagram) |
| Starting torque | ≤3 in-oz (77 °F, IP 65), ≤0.02 Nm (+25 °C, IP 65) |
| Material | Housing: aluminium, powder-coated, Shaft: stainless steel |
| Operating temperature | -40...+212 °F (-40...+100 °C), (fixed cable): see temperature diagram |
| Relative humidity | 98 % non-condensing |
| Resistance | EN 60068-2-6 Vibration 20 g, 60-2000 Hz, EN 60068-2-27 Shock 200 g, 6 ms |
| Connection | MIL-connector, 7-pin, MIL-connector, 10-pin, Cable (AWG26 wire) |
| Weight approx. | 23 oz., 660 g |
Obtain a Quote for Baumer Draw Wire Encoder HS35F part no: 11076339 at economical prices. Specifications Overview for HS35F, 11076339 reveals voltage supply of 4.75...30 VDC and a low power consumption of ≤40 mA (24 VDC), ≤130 mA (4.75 VDC) + output load, max. 250 mA without load. These encoders use Optical sensing for accurate measurement and provide output frequencies of ≤300 kHz (TTL), ≤160 kHz (HTL). The available output stages include Linedriver (TTL, 7272) Vout = 5 V, short-circuit proof, Push-pull (HTL, 7272) Vout = Vin, short-circuit proof. The encoders feature a ø3.15" (ø80 mm) flange size and operate at speeds of up to ≤5000 rpm (see temperature diagram). The Housing: aluminium, powder-coated, Shaft: stainless steel. Connection options include MIL-connector, 7-pin, MIL-connector, 10-pin, Cable (AWG26 wire). The approximate weight is 23 oz., 660 g. Take the First Step with a Quote for your requirement of Baumer Draw Wire Encoder. Our commitment to better pricing and exceptional support sets us apart from other Competitors.
