In most procurement cycles, BANNERENGINEERING-ES-VA-5A is considered with Banner Photoelectric Sensor, Sick Safety Relay and Banner Bannerengineering Es Fa 11Aa, giving decision-makers confidence that theyβve chosen the most dependable component.
Banner ES-VA-5A Safety Relay
The Banner ES-VA-5A Safety Relay offers 3, rating, Screw terminal type. Manufactured by Banner under the Banner Safety Relay category, this model belongs to the ATK Series.
| Supply Voltage | 230 V ac +/- 15% (A1-A2); 11 - 27.6 V dc (B1-B2) |
| Safe Output Rating | Relay - 6 A |
| Power Consumption | 4 W / 7 VA |
Banner ES-VA-5A Safety Relay β Technical Specifications
| Specification | Value |
|---|---|
| Type | ES and GM Series E-Stop and Guard Monitoring Safety Relays |
| IP Rating | IP20 |
| Power | AC/DC Universal |
| Supply Voltage | 230 V ac +/- 15% (A1-A2); 11 - 27.6 V dc (B1-B2) |
| Device Type | Safety Relay |
| PL Rating | e |
| Recovery Time | 350 |
| SIL Rating | 3 |
| Vibration | 10-55 Hz at 0.35 mm; 60 - 150 Hz at 5 g max. |
| LCD Display | No |
| In-Series Diagnostics | No |
| Max Operating Temperature ( Β°C) | 50 |
| Relative Humidity | 90% @ 50Β° C |
| SISTEMA | PFHd = 5.8 x 10-8 |
| Safety Module Type | Emergency Stop Module |
| Expandable | No |
| Dimension (H x W x D in mm) | 84 x 45 x 118 |
| Input Operation | Simultaneous or Concurrent |
| Number of Safe Inputs | 1 |
| Input Configuration | 2 NC or 1 NC |
| Independently Controlled Safe Outputs | 1 |
| Output Configuration | 4 NO |
| Non Safe Output Rating | Relay - 5 A |
| Safe Output Rating | Relay - 6 A |
| Splittable Safe Output | No |
| Mechanical Life (Operations in Millions) | 50 |
| Power Consumption | 4 W / 7 VA |
| Response Time (ms) | 25 (typical) |
| Terminal Type | Screw |
| Removable Terminals | Yes |
| Electrical Life (Cycles @ VA) | 1,000,000 @ 450 VA |
| Safety Category Rating | 4 |
| E-Stops/Rope Pulls | Yes |
| Safety Mat | No |
| Motor Speed | No |
| Muting | No |
| Gate Switch (NC/NC) Input | Yes |
| Gate Switch (NC/NO) Input | No |
| Gate Switch (OSSD) Input | No |
| Light Curtains/Scanner with EDM Input | No |
| Light Curtains/Scanner without EDM Input | No |
| Non Safe Output Configuration | 1 NC, 2 PNP |
| Safety Input - Dual Channel (Dry Contact) | 20-50 mA @ 12-30 V dc |
| Safety Input - Reset | 20-50 mA @ 12-30 V dc (dry contact only) |
| Input Resistance | 250 Ξ© max. per channel |
| Recovery Time (ms) | 350 |
