Autonics TR1D-R4RR Slim Single Display PID Temp Controllers
+91 79955 44066 sales@indmall.in

Autonics TR1D-R4RR - Slim Single Display PID Temp Controllers

Technical Specifications of Autonics Slim Single Display PID Temp Controllers TR1D-R4RR:

SpecValue
Power supply100-240VAC~ 50/60Hz
Control methodON/OFF, P, PI, PD, PID

Autonics Slim Single Display PID Temp Controllers TR1D-R4RR Technical Specifications

SpecificationValue
Power supply100-240VAC~ 50/60Hz
Power consumptionMax. 8VA
Sampling cycle50, 100, 250ms
Display method7-segment (red) 4-digit
Control methodON/OFF, P, PI, PD, PID
Proportional band0.1 to 999.9℃
Integral time0 to 9999 sec
Derivative time0 to 9999 sec
Control periodRelay output: 0.5 to 120.0 sec, SSR output: 0.5 to 120.0 sec
Environment_Ambient temperature-10 to 50℃, storage: -20 to 60℃
Environment_Ambient humidity35 to 85% RH, storage: 35 to 85% RH
Insulation typeDouble insulation or reinforced insulation (dielectric strength between the charging part and the case: 3 kV)
Control output_Relay250VAC~ 3A 1a
Option output_AlarmAL1, AL2: 250VAC~ 3A 1a
Option output_Trans.DC 4 - 20 mA (load resistance: ≤ 500 Ω, output accuracy: ±0.3% F.S.)
Dielectric strengthBetween the charging part and the case : 3,000 VAC~ 50/60 Hz for 1 min
Vibration0.75 mm amplitude at frequency of 5 to 55 Hzin each X, Y, Z direction for 2 hours
Relay life cycle_MechanicalOUT1/2, AL1/2: min. 5,000,000 operations
Relay life cycle_ElectricalOUT1/2, AL1/2: min. 100,000 (resistance load: 250VAC~ 5A)
Insulation resistance100MΩ or more (500VDC megger basis)
Noise immunity±2 kV square shaped noise by noise simulator (pulse width: 1 ㎲) R-phase, S-phase
Memory Protection≈ 10 years (non-volatile semiconductor memory type)
Allowable voltage range90 to 110% of rated voltage
Input type_RTDDPt100Ω, Cu50Ω, Nickel120Ω (permissible line resistance max. 5Ω)
Input type_TCK(CA), J(IC), L(IC), T(CC), R(PR), S(PR)
Input type_CT0.0-50.0A(primary current measurement range) ※CT ratio=1/1000
Display accuracyRTD/Thermocouple: ㆍ At room temperature (23℃ ±5℃): (PV ±0.3% or ±1℃, select the higher one) ±1-digitㆍ Out of room temperature ranges: (PV ±+H400.5% or ±2℃, select the higher one) ±1-digit
Display accuracy_CT input±5% F.S. ±1-digit
Control output_HysteresisControl output: 1 to 100℃/℉ (0.1 to 100.0℃/℉)Alarm output: 1 to 100℃/℉ (0.1 to 50.0℃/℉)
WeightApprox. 194.5g (approx. 123.5g)