Autonics SPB-A240-24 10A SMPS
The SPB-A240-24 is an Autonics 10A SMPS delivering 24VDC output, 10A current, and 240W power for panels industrial automation. Manufactured by Autonics under the Autonics SMPS category, this unit belongs to the SP Series and supports 100–240VAC input, DIN rail mounting, IP20 protection, and controlled voltage fluctuation limits.
| Brand | Autonics |
| Product Type | SMPS |
| Model Number | SPB-A240-24 |
Autonics SPB-A240-24 10A SMPS – Technical Specifications
| Specification | Value |
|---|---|
| Input_Voltage | 100 - 240 VAC~/ 90 - 350 VDC@(=)(allowable voltage: 85 - 264 VAC~) |
| Input_Current_115VAC~ | 2.5A |
| Input_Current_230VAC~ | 1.3A |
| Input_Frequency | 50/60Hz |
| Input_Efficiency_115VAC~ | 0.89 |
| Input_Efficiency_230VAC~ | 0.92 |
| Input_Power factor_115VAC~ | 0.99 |
| Input_Power factor_230VAC~ | 0.9 |
| Output_Voltage | 24VDC |
| Output_Current | 10A |
| Output_power | 240W |
| Output_Input fluctuation ratio | Max. ±0.5% |
| Output_Load fluctuation ratio | ≤ 1.5 % |
| Output_Temperature variation | ≤ 0.05 % / ℃ |
| Indicator | Output indicator (green), output low voltage indicator (red) |
| Protection | Over-current protection, Over-voltage protection, Output short-circuit protection, Overheat protection |
| Insulation resistance | Among all input terminals, all output terminals and PE : ≥ 100 MΩ (500 VDC@(=)megger) |
| Dielectric strength | Among all input terminals and all output terminals: 3 kVAC~, Cutoff current = 20 mAAmong all input terminals and PE: 2 kVAC~, Cutoff current = 20 mAAmong all output terminals and PE: 1 kVAC~, Cutoff current = 20 mA |
| Vibration | 0.75 mm amplitude at frequency 10 to 55 Hz in each X, Y, Z direction for 2 hours |
| Shock | 150 m/s² (≈ 15 G) in each X, Y, Z direction for 3 times |
| EMS | Conforms to EN61000-6-2 |
| EMI | Conforms to EN61000-6-4 |
| Environment_Ambient temperature | -20 to 70 ℃, storage: -25 to 80 ℃ (no freezing or condensation) |
| Environment_Ambient humidity | 20 to 90 %RH, storage: 20 to 90 %RH (no freezing or condensation) |
| Life expectancy | 10 years |
| Protection structure | IP20(IEC standard) |
| Unit weight (packaged weight) | ≈ 850 g (≈ 1,050 g) |
The Autonics SPB-A240-24 10A SMPS is a regulated power supply used in industrial automation systems requiring high-current DC output. This SPB-A240-24 Autonics 10A SMPS delivers 24VDC output with 10A current capacity and 240W rated power, operating from a wide AC and DC input range. It belongs to the SP Series and is designed for DIN rail installation inside industrial control panels.
The SPB-A240-24 Autonics 10A SMPS is commonly applied in conveyors, packaging lines, automation systems, and assembly equipment to power PLCs, drives, actuators, and control circuits. Stable output regulation helps maintain consistent equipment performance under load changes. DIN rail mounting allows clean panel layouts, while controlled fluctuation ratios support dependable operation in demanding industrial environments.
The SPB-A240-24 Autonics 10A SMPS combines defined electrical specifications with a robust enclosure suited for industrial use. With IP20 protection structure, stable voltage regulation, and compatibility with high-current automation loads, it supports reliable system operation. As part of the SP Series, it aligns with established Autonics power supply solutions widely used across industrial automation applications in India.
Related Products
