Autonics SPB-180-24 DIN Rail Switching Mode Power Supplies
The SPB-180-24 is an Autonics DIN Rail Switching Mode Power Supplies delivering 24VDC output, 7.5A current, and 180W power. Manufactured by Autonics under the Autonics SMPS range, this model belongs to the SP Series and supports 100–240VAC input, DIN rail mounting, controlled fluctuation ratios, and IP20 protection.
| Brand | Autonics |
| Product Type | SMPS |
| Model Number | SPB-180-24 |
Autonics SPB-180-24 DIN Rail Switching Mode Power Supplies – Technical Specifications
| Specification | Value |
|---|---|
| Input_Voltage | 100-240VAC~ 50/60Hz |
| Input_Frequency | 50/60Hz |
| Output_Voltage | 24VDC |
| Output_Current | 7.5A |
| Output_power | 180W |
| Output_Input fluctuation ratio | Max. ±0.5% |
| Output_Load fluctuation ratio | Max. ±1% |
| Permissible voltage | 85-264VAC~ 50/60Hz, 120-370VDC |
| Mounting type | DIN Rail |
| Output type_Voltage adjustment range | Max. ±5% |
| Protection | Over-Current/Over-Voltage/Inrush Current/Output Short-Circuit/Remote Control/Output Low-Voltage Indicate/Power Factor Correction/Terminal Cover |
| Environment_Ambient temperature | -10 to 50℃, storage: -25 to 65℃ (surrounding air temp.: Max. 40℃) |
| Environment_Ambient humidity | 25 to 85%RH, storage: 25 to 90%RH |
| Input_Efficiency_100VAC~ | 0.89 |
| Input_Efficiency_240VAC~ | 0.92 |
| Input_Current consumption_100VAC~ | 2.03A |
| Input_Current consumption_240VAC~ | 0.83A |
| Output type_Ripple&Ripple noise | Max. ±1% |
| Input_Power factor | Min. 0.9 |
| Protection structure | IP20(IEC standard) |
| Weight | Approx. 609g(approx. 505g) |
The Autonics SPB-180-24 DIN Rail Switching Mode Power Supplies unit is designed for dependable DC power delivery in industrial automation systems. This SPB-180-24 Autonics DIN Rail Switching Mode Power Supplies model provides 24VDC output with 7.5A current and 180W rated power from a wide AC input range. It is part of the SP Series and intended for DIN rail mounting inside control panels.
The SPB-180-24 Autonics DIN Rail Switching Mode Power Supplies unit is used in conveyors, packaging machines, automation panels, and assembly lines. It supplies stable power to PLCs, I/O modules, sensors, and control devices. DIN rail installation supports organized panel layouts, while regulated output helps maintain consistent operation under varying industrial loads.
The SPB-180-24 Autonics DIN Rail Switching Mode Power Supplies solution combines defined electrical ratings with compact construction for continuous industrial use. With wide permissible input voltage, controlled fluctuation ratios, and IP20 protection, it supports reliable performance in industrial environments. As part of the SP Series, it aligns with established Autonics power supply solutions trusted across industrial automation applications.
Related Products
