Autonics PR18-8DP: PNP NO M18 Inductive Sensor
The technical specifications for the Autonics PR18-8DP PNP NO M18 Inductive Sensor:
- Sensing Distance: 8 mm
- Sensing Side Diameter: M18
- Wire Type and Power: DC 3-wire type 12-24VDC
- Installation: Flush
- Response Frequency: 350 Hz
- Control Output: PNP Normally Open
- Cable Standard/material: Standard cable
- Body Length: Standard type
Autonics PR18-8DP PNP NO M18 Inductive SensorTechnical Specification:
| Sensing Distance | 8 mm |
| Sensing side diameter | M18 |
| Wire type and power | DC 3-wire type 12-24VDC |
| Installation | Non-Flush |
| Standard sensing target | 25×25×1mm(iron) |
| Response frequency | 350 Hz |
| Current specification | Current consumption: Max. 10mA |
| Control output | PNP Normally Open |
| Material | Case/Nut: Nikel plated Brass, (connector case of DIA. of sensing side Ø 8 mm: SUS303), washer: Nikel plated Iron, sensing side: polybutylene terephthalate, standard cable (black): polyvinyl chloride (PVC), oil resistant cable (gray): oil resistant polyvinyl chloride (PVC) |
| Cable Standard/material | Standard cable |
| Protection structure | IP67(IEC standard) |
| Body length | Standard type |
| Environment_Ambient temperature | -25 to 70℃, storage: -30 to 80℃ |
| Environment_Ambient humidity | 35 to 95% RH, storage: 35 to 95% RH |
| Hysteresis(distance) | Max. 10% of sensing distance |
| Residual voltage | Max. 1.5 V |
| Weight | Approx. 122g(approx. 110g) |
Are you looking for the Autonics PR18-8DP Proximity Sensor? This PNP NO M18 Inductive Sensor has an 8 mm sensing distance, and a non-flush installation, Operating on DC 3-wire type at 12-24VDC, it targets a 25×25×1mm iron standard, Nikel plated Brass case/nut and polybutylene terephthalate sensing side, with a 350 Hz response frequency, and IP67 protection, it guarantees reliable performance. For detailed information, refer to the PR18-8DP datasheet. Find competitive Autonics PR18-8DP prices at IndMALL Automation and seize the best offers on inductive sensors.