Autonics E50S8-2048-3-T-24 50 mm Incremental Rotary Encoders
E50S8-2048-3-T-24 is an Autonics 50 mm Incremental Rotary Encoders model delivering 2048P/R resolution, Ø8mm shaft, 300kHz response and feedback. Manufactured by Autonics, this encoder supports 5000rpm, A, B, Z output phases, totem pole control output, 12–24VDC power supply, axial cable connection, IP50 protection, maximum 70gf.cm starting torque, and approximately 363g weight, and is available under the Autonics Rotary Encoder category as part of the E50S Series.
| Brand | Autonics |
| Product Type | Rotary Encoder |
| Model Number | E50S8-2048-3-T-24 |
Autonics E50S8-2048-3-T-24 50 mm Incremental Rotary Encoders – Technical Specifications
| Specification | Value |
|---|---|
| Shaft outer diameter | Ø8mm |
| Max. response frequency | 300kHz |
| Max. allowable revolution | 5000rpm |
| Starting torque | Max. 70gf.cm(max. 0.00686N.m) |
| Resolution | 2048P/R |
| Output phase | A, B, Z |
| Control output | Totem pole |
| Power supply | 12-24VDC |
| Connection type | Axial cable type |
| Protection structure | IP50 (IEC standard) |
| Environment_Ambient temperature | -10 to 70℃, storage: -25 to 85℃ |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 90% RH |
| Accessories | Ø8mm coupling, Bracket |
| Weight | Approx. 363g(approx. 275g) |
The Autonics E50S8-2048-3-T-24 50 mm Incremental Rotary Encoders unit is used for rotational feedback in industrial automation systems. This model provides 2048P/R resolution, Ø8mm shaft diameter, 300kHz maximum response frequency, and operates on a 12–24VDC power supply. The E50S8-2048-3-T-24 belongs to the E50S Series and supports consistent signal generation in automation environments.
In industrial applications, the E50S8-2048-3-T-24 Autonics 50 mm Incremental Rotary Encoders model is applied in conveyors, packaging machines, automated assembly lines, and motion control equipment. The A, B, Z phase output enables accurate speed and direction detection, while the totem pole output maintains stable signal transmission. Its allowable speed of 5000rpm supports continuous operation under defined industrial conditions.
The E50S8-2048-3-T-24 is designed to maintain reliable mechanical and electrical performance over extended operating cycles. With controlled starting torque, IP50 protection structure, and axial cable connection, this Autonics encoder integrates smoothly into industrial automation systems. As part of the E50S Series, it meets common application requirements in India where dependable rotational sensing and repeatable output behavior are required.
Related Products
