Autonics E40S6-1000-3-T-24, 3 Phase Encoder | IndMALL
+91 79955 44066 sales@indmall.in
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Autonics E40S6-1000-3-T-24: 3 Phase Encoder

The technical specifications for the Autonics 3 Phase Encoder E40S6-1000-3-T-24:

  • Shaft Outer Diameter: Ø6mm
  • Resolution: 1000 Pulses Per Revolution (P/R)
  • Output Phase: A, B, Z
  • Control Output: Totem Pole
  • Power Supply: 12 to 24 VDC
  • Connection Type: Cable Type
  • Max. Response Frequency: 300 kHz
  • Max. Allowable Revolution: 5000 revolutions per minute (RPM)

Original price was: ₹13,950.00.Current price is: ₹12,555.00.

Out of stock

Autonics 3 Phase Encoder E40S6-1000-3-T-24 Technical Specification:

 

 Type of Encoder Diameter ø40mm shaft/hollow shaft/hollow built-in type of incremental rotary encoder
 Shaft outer diameter  Ø6mm
 Resolution  1000P/R
 Output phase  A, B, Z
 Control output  Totem pole
Totem pole output • Low – Load current: Max. 30mA, Residual voltage: Max. 0.4VDC
• High – Load current: Max. 10mA, Output voltage(Power voltage 5VDC): Min. (Power voltage-2.0)VDC,
Output voltage(Power voltage 12-24VDC): Min. (Power voltage-3.0)VDC
Response time (rise/fall) Totem pole output Max. 1㎲ (cable length: 2m, I sink=20mA)
Current consumption Max. 80mA(disconnection of the load), Line driver output: Max. 50mA(disconnection of the load)
Insulation resistance Min. 100MΩ(at 500VDC megger between all terminals and case)
Dielectric strength 750VAC 50/60Hz for 1 minute(Between all terminals and case)
 Power supply 12-24VDC ±5%(ripple P-P: max. 5%)
 Connection type  Cable type
Vibration 1.5mm amplitude or 300m/s2 at a frequency of 10 to 55Hz(for 1 min.) in each of X, Y, and Z directions for 2 hours
Shock Approx. Max. 50G
 Protection structure  IP50
 Max. response frequency  300kHz
 Max. allowable revolution  5000rpm
Environment_Ambient temperature -10 to 70℃, storage: -25 to 85℃
Environment_Ambient humidity 35 to 85% RH, storage: 35 to 90% RH
 Starting torque  Max. 40gf.cm(max. 0.00392N.m)
Accessories Ø6mm coupling standard, Ø8mm coupling(sold separately)
 Weight  Approx. 120g

Are you looking for the Autonics E40S6-1000-3-T-24 3-Phase Encoder? This encoder has a 6mm shaft diameter and offers a resolution of 1000P/R. It’s capable of a maximum response frequency of 300kHz and can handle up to 5000rpm, with a starting torque of max. 40gf.cm. It has a totem pole control output and operates on a 12-24VDC power supply. The encoder comes with a radial cable connection and is IP50-protected. IndMALL Automation ensures the best prices for this Autonics Rotary Encoder. For detailed specifications, refer to the E40S6-1000-3-T-24 datasheet and E40S6-1000-3-T-24 manual. Trust IndMALL Automation for all your encoder needs, including the Autonics 3-phase encoders E40S6-1000-3-T-24.

IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products