In sourcing discussions, BS5-T1M-P is often placed next to Autonics Proximity Sensor, Autonics Digital Counter and Autonics Bs5 L2M P so procurement teams can align budgets and technical requirements effectively.
Autonics BS5-T1M-P Photomicro Sensor
The Autonics BS5-T1M-P Photomicro Sensor offers Through-beam type, 5mm sensing distance, Infrared LED(940nm) light source, 5-24VDC power supply, PNP open collector output control output. Manufactured by Autonics under the Autonics Photomicro Sensor category, this model belongs to the Autonics BS5 Series.
| Brand | Autonics |
| Product Type | Photomicro Sensor |
| Model Number | BS5-T1M-P |
Autonics BS5-T1M-P Photomicro Sensor β Technical Specifications
| Specification | Value |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 5mm |
| Sensing target | Opaque |
| Min. sensing target | β₯Γ0.8mmΓ2mm |
| Hysteresis(distance) | β€0.05mm |
| Response time | Light ON: Max. 20γ², Dark ON: Max. 100γ² |
| Response frequency | 2kHz |
| Light source | Infrared LED(940nm) |
| Operation mode | Light ON/Dark ON(set by control wire) |
| Indicator | Operation indicator (red LED) |
| Power supply | 5-24VDC |
| Current consumption | Max. 30mA |
| Control output | PNP open collector output |
| Load voltage | β€30VDC@(=) |
| Load current | Max. 100mA |
| Residual voltage | NPN: β€1.2VDC@(=), PNP: β€ 1.2VDC@(=) |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Insulation resistance | β₯20 MΞ© (250 VDC@(=) megger) |
| Noise immunity | The square wave noise (pulse width: 1γ²) by the noise simulator Β±240VDC@(=) |
| Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration | 1.5mm amplitude (max. acceleration 196m/sΒ²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/sΒ² (approx. 1,500G) in each X, Y, Z direction for 3 times |
| Environment_Ambient illumination | Fluorescent lamp: Max. 1,000lx(received illumination) |
| Environment_Ambient temperature | -20 to 55β, storage : -25 to 85β |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Protection structure | IP50 (IEC standard) |
| Connection | Cable type |
| Material | Case: PBT, Sensing part: PC |
| Weight_Body | Approx. 50g |
The Autonics BS5-T1M-P Groove-Depth 9 mm Photomicro Sensors use a through-beam sensing type with a fixed 5 mm sensing distance, detecting opaque targets as small as Γ0.8 mm Γ 2 mm. Its tight hysteresis of β€0.05 mm ensures stable detection in repetitive high-speed applications like part counting and positioning.
Powered by 5β24 VDC Β±10% and consuming just 30 mA, this sensor delivers ultra-fast response times of 20 ΞΌs (Light ON) and 100 ΞΌs (Dark ON), supporting operations up to 2 kHz. A 940 nm infrared LED provides consistent performance under varying light conditions, while the PNP open collector output integrates easily with PLCs and control systems. Built-in reverse polarity and short-circuit protection extend equipment safety and lifespan.
Built with a rugged PBT + PC housing rated IP50, the Autonics BS5-T1M-P Groove-Depth 9 mm Photomicro Sensors withstand shocks up to 15,000 m/sΒ² and industrial vibration across all axes. Operating in ambient temperatures from -20Β°C to 55Β°C, they ensure reliable performance even in demanding environments, backed by Autonics Sensors & Controllers quality.
The Autonics BS5-T1M-P Groove-Depth 9 mm Photomicro Sensors are widely used for label detection in packaging, component sensing in electronics assembly, and position verification in automated machinery. Their fast switching speed supports conveyor sorting, filling lines, and high-speed inspection systems without causing cycle delays. Maintenance teams appreciate the cable-type connection for secure installation, while OEMs trust its long-term stability in continuous high-cycle production environments.
