In sourcing discussions, BS5-T1M is often placed next to Autonics Proximity Sensor, Autonics Digital Counter and Autonics Bs5 L2M P so procurement teams can align budgets and technical requirements effectively.
Autonics BS5-T1M Photomicro Sensor
The Autonics BS5-T1M Photomicro Sensor offers Through-beam type, 5mm sensing distance, Infrared LED(940nm) light source, 5-24VDC power supply, NPN open collector output control output. Manufactured by Autonics under the Autonics Photomicro Sensor category, this model belongs to the Autonics BS5 Series.
| Brand | Autonics |
| Product Type | Photomicro Sensor |
| Model Number | BS5-T1M |
Autonics BS5-T1M Photomicro Sensor β Technical Specifications
| Specification | Value |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 5mm |
| Sensing target | Opaque |
| Min. sensing target | β₯Γ0.8mmΓ2mm |
| Hysteresis(distance) | β€0.05mm |
| Response time | Light ON: Max. 20γ², Dark ON: Max. 100γ² |
| Response frequency | 2kHz |
| Light source | Infrared LED(940nm) |
| Operation mode | Light ON/Dark ON(set by control wire) |
| Indicator | Operation indicator (red LED) |
| Power supply | 5-24VDC |
| Current consumption | Max. 30mA |
| Control output | NPN open collector output |
| Load voltage | β€30VDC@(=) |
| Load current | Max. 100mA |
| Residual voltage | NPN: β€1.2VDC@(=), PNP: β€ 1.2VDC@(=) |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Insulation resistance | β₯20 MΞ© (250 VDC@(=) megger) |
| Noise immunity | The square wave noise (pulse width: 1γ²) by the noise simulator Β±240VDC@(=) |
| Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration | 1.5mm amplitude (max. acceleration 196m/sΒ²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/sΒ² (approx. 1,500G) in each X, Y, Z direction for 3 times |
| Environment_Ambient illumination | Fluorescent lamp: Max. 1,000lx(received illumination) |
| Environment_Ambient temperature | -20 to 55β, storage : -25 to 85β |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Protection structure | IP50 (IEC standard) |
| Connection | Cable type |
| Material | Case: PBT, Sensing part: PC |
| Weight_Body | Approx. 50g |
The Autonics BS5-T1M Groove-Depth 9 mm Photomicro Sensor uses a through-beam sensing method with a fixed 5mm sensing distance for accurate detection of opaque targets. It can detect objects as small as Γ0.8mm Γ 2mm and maintains a hysteresis of β€0.05mm for precision positioning. The integrated infrared LED (940nm) ensures stable performance even under ambient illumination up to 1,000lx.
With an ultra-fast response time of 20Β΅s in Light ON mode and 100Β΅s in Dark ON mode, and a 2kHz response frequency, this model supports rapid automation tasks without missed detections. It operates within a 5β24VDC Β±10% supply range, consuming just 30mA, and uses an NPN open collector output for compatibility with PLCs and control panels. Built-in reverse polarity and short-circuit protection circuits enhance operational safety in industrial setups.
The BS5-T1M Photomicro Sensor is engineered with a PBT case and PC sensing part for durability, offering vibration resistance up to 196m/sΒ² and shock resistance up to 15,000 m/sΒ². Rated to IP50, it performs reliably in dust-prone environments. Learn more at Autonics Sensors & Controllers for complete specifications and related models.
Engineers rely on this model for high-speed production lines in electronics, printing, packaging, and medical equipment manufacturing, where consistent accuracy is critical. These capabilities make the Autonics BS5-T1M a dependable solution for demanding industrial sensing applications.
Related Products
