In sourcing discussions, BS5-K1M is often placed next to Autonics Proximity Sensor, Autonics Digital Counter and Autonics Bs5 L2M P so procurement teams can align budgets and technical requirements effectively.
Autonics BS5-K1M Photomicro Sensor
The Autonics BS5-K1M Photomicro Sensor offers Through-beam type, 5mm sensing distance, Infrared LED(940nm) light source, 5-24VDC power supply, NPN open collector output control output. Manufactured by Autonics under the Autonics Photomicro Sensor category, this model belongs to the Autonics BS5 Series.
| Brand | Autonics |
| Product Type | Photomicro Sensor |
| Model Number | BS5-K1M |
Autonics BS5-K1M Photomicro Sensor β Technical Specifications
| Specification | Value |
|---|---|
| Sensing type | Through-beam type |
| Sensing distance | 5mm |
| Sensing target | Opaque |
| Min. sensing target | β₯Γ0.8mmΓ2mm |
| Hysteresis(distance) | β€0.05mm |
| Response time | Light ON: Max. 20γ², Dark ON: Max. 100γ² |
| Response frequency | 2kHz |
| Light source | Infrared LED(940nm) |
| Operation mode | Light ON/Dark ON(set by control wire) |
| Indicator | Operation indicator (red LED) |
| Power supply | 5-24VDC |
| Current consumption | Max. 30mA |
| Control output | NPN open collector output |
| Load voltage | β€30VDC@(=) |
| Load current | Max. 100mA |
| Residual voltage | NPN: β€1.2VDC@(=), PNP: β€ 1.2VDC@(=) |
| Protection circuit | Reverse polarity protection circuit, output overcurrent (short-circuit) protection circuit |
| Insulation resistance | β₯20 MΞ© (250 VDC@(=) megger) |
| Noise immunity | The square wave noise (pulse width: 1γ²) by the noise simulator Β±240VDC@(=) |
| Dielectric strength | Between the charging part and the case: 1,000 VAC~ 50/60 Hz for 1 minute |
| Vibration | 1.5mm amplitude (max. acceleration 196m/sΒ²) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours |
| Shock | 15,000 m/sΒ² (approx. 1,500G) in each X, Y, Z direction for 3 times |
| Environment_Ambient illumination | Fluorescent lamp: Max. 1,000lx(received illumination) |
| Environment_Ambient temperature | -20 to 55β, storage : -25 to 85β |
| Environment_Ambient humidity | 35 to 85% RH, storage: 35 to 85% RH |
| Protection structure | IP50 (IEC standard) |
| Connection | Cable type |
| Material | Case: PBT, Sensing part: PC |
| Weight_Body | Approx. 50g |
The Autonics BS5-K1M Groove-Depth 9 mm Photomicro Sensors use a through-beam sensing type with a fixed 5 mm sensing distance, capable of detecting opaque objects as small as Γ0.8 mm Γ 2 mm. A hysteresis of β€0.05 mm ensures stable, repeatable accuracy in fast-moving industrial applications like assembly verification and thread detection.
Powered by 5β24 VDC Β±10% and drawing just 30 mA, the BS5-K1M offers rapid 20 ΞΌs Light ON and 100 ΞΌs Dark ON response times, with a 2 kHz operating frequency for high-speed automation. A 940 nm infrared LED enables reliable performance even under ambient light up to 1,000 lx. The NPN open collector output integrates easily with PLCs, supported by built-in reverse polarity and short-circuit protection for long-term electrical safety.
With a rugged PBT + PC housing rated IP50, the Autonics BS5-K1M Groove-Depth 9 mm Photomicro Sensors withstand vibration up to 196 m/sΒ² and shocks up to 15,000 m/sΒ². Operating in temperatures from -20Β°C to 55Β°C, they are built for continuous use in harsh conditions, backed by Autonics Sensors & Controllers quality assurance.
The Autonics BS5-K1M Groove-Depth 9 mm Photomicro Sensors are widely applied in assembly line part detection, thread presence monitoring, and precision jig automation. Their high-speed switching supports conveyor sorting, label verification, and quality inspection without process delays. Maintenance engineers value the cable-type connection for secure, stable installation, while OEMs trust its accuracy and durability for high-cycle industrial production.
