Omron E2EQ-X10D1-M1GJ 0.5M Proximity Sensor
Omron E2EQ-X10D1-M1GJ 0.5M is an M30 shielded inductive proximity sensor with a 10 mm sensing distance and a 0 to 8 mm setting distance. It uses a DC 2-wire NO output through an M12 pre-wired standard connector with a 0.5 m cable and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 400 Hz, while control output is rated from 3 to 100 mA. Red operation and green setting indicators are provided, with surge suppression and load short-circuit protection specified. The E2EQ-X10D1-M1GJ 0.5M is part of M30 shielded proximity sensors from Omron industrial automation sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2EQ-X10D1-M1GJ 0.5M |
Omron E2EQ-X10D1-M1GJ 0.5M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M30 |
| Mounting type | Shielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output configuration | DC 2-wire |
| Operation Mode | NO |
| Connection Method | M12 Pre-wired Standard Connector 0.5 M Cable |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 30 × 30 × 1 mm |
| Response Frequency | 400 Hz |
| Power Supply Voltage | 12 to 24 VDC |
| Protection Circuit | Load short-circuit protection, Surge suppressor |
| Ambient Temperature Range | Operating/Storage: −25 to 70°C (with no icing or condensation) |
| Degree of Protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Control Output | 3 to 100 mA |
| Indicators | Operation indicator (red), Setting indicator (green) |
| Materials | Fluororesin coating (Base material: brass) , Fluororesin, Fluororesin coating (Base material: brass) , Zinc-plated iron. |
| Weight | Approx. 190 g |
The Omron E2EQ-X10D1-M1GJ 0.5M Proximity Sensor combines an M30 shielded inductive sensing body with a 10 mm sensing distance and a 0 to 8 mm setting distance. It uses a DC 2-wire NO output through an M12 pre-wired standard connector with a 0.5 m cable and operates from 12 to 24 VDC. Ferrous metal is the stated detection target, paired with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 400 Hz, while control output is rated from 3 to 100 mA. A red operation indicator and green setting indicator are provided, with load short-circuit protection and surge suppression specified.
Operating and storage conditions for the E2EQ-X10D1-M1GJ cover -25 to 70°C without icing or condensation. IEC 60529 IP67 and an in-house oil-resistant rating are specified. The shielded M30 sensing arrangement provides the stated 10 mm range, while the 0.5 m lead and M12 standard connector support removable field wiring. Fluororesin coating over brass base material and zinc-plated iron are listed among the construction details. Its 400 Hz response frequency and DC 2-wire NO configuration are specified for industrial metal detection. For the same E2EQ base model using a shorter 0.3 m standard-connector cable, see E2EQ-X10D1-M1GJ 0.3M.
