Omron E2E-X5B1D18 2M Proximity Sensor
Omron E2E-X5B1D18 2M is an M18 shielded inductive proximity sensor with a 5 mm sensing distance, 0 to 4 mm setting distance, and short-body construction. It provides a DC 3-wire PNP output with NO operation through a pre-wired 2 m cable and operates from 10 to 30 VDC. Ferrous metal is the specified sensing target, with an iron 18 × 18 × 1 mm standard sensing object. Response frequency is 600 Hz, while the one-output configuration supports up to 200 mA. Power-supply reverse polarity, surge suppression, output short-circuit, and output reverse-polarity protection are specified. The E2E-X5B1D18 2M is included among M18 PNP proximity sensors from Omron automation sensing solutions.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X5B1D18 2M |
Omron E2E-X5B1D18 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting type | Shielded |
| Sensing Distance | 5 mm |
| Setting Distance | 0 to 4 mm |
| Output configuration | DC 3-Wire PNP |
| Operation Mode | NO |
| Body Length | Short Body |
| Connection Method | Pre-wired 2 M Cable |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 18 × 18 × 1 mm |
| Response Frequency | 600 Hz |
| Power Supply Voltage | 10 to 30 VDC |
| Protection Circuit | Power supply reverse polarity protection, Surge suppressor, Output short-circuit protection, Output reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: -40 to 85°C |
| Degree of Protection | IEC 60529:IP67, ISO 20653 |
| Control Output | 1-output models: 10 to 30 VDC, Class 2, 200 mA max, 2-output models: 10 to 30 VDC, Class 2, 100 mA max. |
| Indicators | In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and communication indicator (green, not lit) In the IO-Link communication mode (COM mode): Operation indicator (orange, lit) and communication indicator (green, blinking at 1 s intervals) |
| Materials | Nickel-plated brass, Polybutylene terephthalat (PBT), Nickel-plated brass, Zinc-plated iron, Vinyl chloride (PVC). |
| Weight | Approx. 170 g |
The Omron E2E-X5B1D18 2M Proximity Sensor uses an M18 shielded inductive sensing body with a 5 mm sensing distance, a 0 to 4 mm setting distance, and short-body construction. It provides a DC 3-wire PNP output with NO operation through a pre-wired 2 m cable and operates from 10 to 30 VDC. Ferrous metal is the specified target, with an iron 18 × 18 × 1 mm standard sensing object. Response frequency is 600 Hz. The one-output model supports up to 200 mA, with power-supply reverse-polarity protection, surge suppression, output short-circuit protection, and output reverse-polarity protection specified. Standard I/O and IO-Link modes provide operation and communication status indication.
Operating and storage conditions for the E2E-X5B1D18 extend from -40 to 85°C. IEC 60529 IP67 and ISO 20653 specifications are listed for environmental protection. The shielded M18 arrangement supports mounting close to surrounding metal while providing a 5 mm sensing range. Its short body helps reduce rear mounting depth, while the fixed 2 m cable supports direct routing to machine control terminals. Nickel-plated brass, PBT, zinc-plated iron, and PVC are specified among the construction materials. The PNP NO output provides a sourcing normally open signal for compatible PLC inputs. The supplied comparison data does not identify a specific alternative model for this configuration.
