Omron E2E-X2D1-M1 Proximity Sensor
Omron E2E-X2D1-M1 is a cylindrical M8 shielded inductive proximity sensor with a 2 mm sensing distance and 0 to 1.6 mm setting distance. It provides a DC 2-wire NO output through an M12 connector and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 8 × 8 × 1 mm standard sensing object. Response frequency is 1.5 kHz, while control output is rated from 3 to 100 mA with a 50 mA diagnostic output. Red and green indicators show operation and setting status, with surge suppression and load short-circuit protection specified. The E2E-X2D1-M1 is included among M8 DC 2-wire proximity sensors from Omron industrial sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X2D1-M1 |
Omron E2E-X2D1-M1 Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Housing Shape | Cylindrical |
| Size | M8 |
| Mounting type | Shielded |
| Sensing Distance | 2 mm |
| Setting Distance | 0 to 1.6 mm |
| Output configuration | DC 2-wire |
| Operation Mode | NO |
| Connection Method | M12 Connector |
| Wire color / pin arrangement | 1: +V, 4: 0 V |
| Detectable Object | Ferrous metal |
| Standard Sensing Object | Iron, 8 × 8 × 1 mm |
| Response Frequency | 1.5 kHz |
| Power Supply Voltage | 12 to 24 VDC |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Degree of Protection | IEC 60529 IP67, in-house standards: oil-resistant |
| Control Output | 3 to 100 mA, Diagnostic output: 50 mA |
| Indicators | Operation indicator (red) and setting indicator (green) |
| Materials | Stainless steel (SUS303), PBT, Nickel-plated brass, Zinc-plated iron. |
| Weight | Approx. 15 g |
The Omron E2E-X2D1-M1 Proximity Sensor uses a cylindrical M8 shielded inductive sensing body with a 2 mm sensing distance and a 0 to 1.6 mm setting distance. It provides a DC 2-wire NO output through an M12 connector and operates from 12 to 24 VDC. Ferrous metal is the specified detection target, with an iron 8 × 8 × 1 mm standard sensing object. Response frequency is 1.5 kHz, while control output is rated from 3 to 100 mA and diagnostic output is rated 50 mA. Red and green indicators display operation and setting status. Surge suppression and load short-circuit protection for the control and diagnostic outputs are specified.
Operating conditions for the E2E-X2D1-M1 extend from -25 to 70°C, while storage covers -40 to 85°C without icing or condensation. IEC 60529 IP67 and an in-house oil-resistant rating are listed. The compact M8 shielded sensing arrangement supports installation close to surrounding metal while providing the stated 2 mm range. Its M12 connector allows detachable cabling, while DC 2-wire NO operation provides a simple switching interface. SUS303 stainless steel, PBT, nickel-plated brass, and zinc-plated iron are specified among the materials. The 1.5 kHz response frequency supports fast repetitive detection. For another E2E sensor using a 3 mm sensing distance and Smartclick connection, see E2E-X3C1L8-M1TJ 0.3M.
