Omron EE-SX970-C1 Photomicrosensor
Omron EE-SX970-C1 is a standard through-beam slot photomicrosensor built around a fixed 5 mm sensing gap and a 4-pole connector. Its NPN output supports both Light-ON and Dark-ON operation, allowing the switching response to match different control requirements. The sensor operates from 5 to 24 VDC and consumes 21 mA, while the output supports a maximum load current of 50 mA. Residual voltage is specified at 0.4 V maximum at 5 mA and 1.0 V maximum at 50 mA. An orange light indicator provides visual status, while the non-modulated optical arrangement establishes the sensing point across the slot. For connector-based installation, the EE-SX970-C1 belongs to the 5 mm slot sensor range across Omron Sensor Products.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX970-C1 |
Omron EE-SX970-C1 Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Type | Standard |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Power Supply Voltage | 5 to 24 VDC |
| Control Output (Output Type) | NPN |
| Connection Method | Connector (4 poles) |
| Current Consumption | 21 mA |
| Operation Mode | With both Dark-ON and Light-ON |
| Control Output (Residual Voltage) | at 5 mA load current: 0.4 V max. at 50 mA load current: 1.0 V max. |
| Control Output (Load Current) | 50 mA max. |
| Indicator | Light indicator (orange) |
| Luminous Method | Non-modulated |
| Ambient Temperature (Operating) | -25 to 55 ℃ (with no freezing or condensation) |
| Ambient Temperature (Storage) | -30 to 80 ℃ (with no freezing or condensation) |
| Ambient Humidity (Operating) | 5 to 85 % (with no freezing or condensation) |
| Ambient Humidity (Storage) | 5 to 95 % (with no freezing or condensation) |
| Vibration Resistance | Destruction: 10 to 2000 Hz, 0.75 mm single amplitude in each X, Y, and Z directions (15 min, 10 cycle) |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Degree Of Protection | IP50 |
| Material | Case: Polybutylene terephthalate (PBT) Cover: Polybutylene terephthalate (PBT) Emitter/Receiver: Polycarbonate (PC) |
The Omron EE-SX970-C1 Photomicrosensor uses a standard through-beam arrangement across a fixed 5 mm sensing slot. Its NPN output supports both Light-ON and Dark-ON operation, allowing the switching response to match different control requirements. The sensor operates from 5 to 24 VDC and consumes 21 mA. Maximum load current is specified at 50 mA, while residual voltage is 0.4 V maximum at a 5 mA load and 1.0 V maximum at 50 mA. An orange light indicator provides operating status. The optical arrangement is non-modulated, and a 4-pole connector provides a detachable electrical interface. This standard body format provides a straightforward mounting option where a component passes through the defined slot position.
The EE-SX970-C1 uses PBT for the case and cover together with polycarbonate emitter and receiver sections. Its operating temperature range is -25°C to 55°C without freezing or condensation, while storage extends from -30°C to 80°C. Mechanical resistance includes vibration from 10 to 2,000 Hz under the stated conditions and shock resistance of 500 m/s² in each X, Y, and Z direction. The enclosure carries an IP50 rating. Its standard shape, NPN output, dual switching modes, and 4-pole connector distinguish the basic connector-type configuration in this group. For an L-shaped model retaining the same electrical characteristics and connector arrangement, refer to the Omron EE-SX971-C1.
