Omron EE-SX676-WR 1M Photomicrosensor
Omron EE-SX676-WR 1M is an F-shaped through-beam slot photomicrosensor that uses a fixed 5 mm sensing gap for monitoring parts moving through a compact machine position. An infrared LED establishes the optical path across the slot, while the NPN output provides the switching signal as the target condition changes. Light-ON or Dark-ON operation can be selected to suit the required control sequence. The sensor operates from 5 to 24 VDC and consumes 12 mA maximum. A 1 m pre-wired cable provides the electrical connection, and load short-circuit protection is included. For pre-wired F-shaped sensing, the EE-SX676-WR 1M sits within the slot-type photomicrosensor range from Omron machine sensing.
| Brand | Omron |
| Product | Photomicro Sensors |
| Model Number | EE-SX676-WR 1M |
Omron EE-SX676-WR 1M Photomicrosensor – Technical Specifications
| Specification | Value |
|---|---|
| Appearance | F-shaped |
| Sensing Method | Throughbeam with slot |
| Sensing Distance | 5 mm |
| Light Source | Infrared LED |
| Power Supply Voltage | 5 to 24 VDC |
| Output Configuration | NPN |
| Connection Method | Pre Wired, Cable Length 1M |
| Current Consumption | 12 mA max. |
| Operation Mode | Dark-ON/ Light-ON (selectable) |
| Indicators | Incident light |
| Ambient Illumination | 1,000 lx max. with fluorescent light on the surface of the receiver |
| Ambient Temperature Range | Operating: −25 to +55°C, Storage: −30 to +80°C (with no icing or condensation) |
| Ambient Humidity Range | Operating: 5% to 85%, Storage: 5% to 95% (with no icing or condensation) |
| Vibration Resistance | Destruction: 20 to 2,000 Hz (peak acceleration: 100 m/s2) 1.5-mm double amplitude for 2 h (4-min periods) each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions |
| Protection Circuits | Load short circuit protection |
| Degree Of Protection | IEC60529 IP50 |
| Material | Polybutylene phthalate (PBT) |
The Omron EE-SX676-WR 1M Photomicrosensor uses an F-shaped body with a fixed 5 mm through-beam slot. An infrared LED creates the optical path between the integrated emitter and receiver, while the NPN output changes according to the target condition within the sensing gap. Light-ON or Dark-ON operation can be selected to suit the required switching sequence. The unit operates from 5 to 24 VDC and consumes 12 mA maximum. Instead of a detachable 4-pole connector, this version uses a 1 m pre-wired cable for direct electrical connection. Load short-circuit protection is included in the output circuit. Fluorescent-light resistance is specified up to 1,000 lx at the receiver surface under the stated operating conditions.
The EE-SX676-WR uses PBT for the sensor body and operates from -25°C to 55°C, while storage temperature extends from -30°C to 80°C. It is specified for vibration from 20 to 2,000 Hz and shock up to 500 m/s² under the listed test conditions. IP50 protection is provided for the enclosure. The F-shaped body and pre-wired connection suit compact machine layouts where a cable needs to run directly from the sensing point without a separate connector. For a connector-type F-shaped model with the same 5 mm slot, NPN output, and selectable Light-ON or Dark-ON operation, see the Omron EE-SX676.
