Omron E3S-AD86 Photoelectric Sensor
Omron E3S-AD86 is a PNP diffuse-reflective photoelectric sensor with a vertical housing and built-in amplifier for direct object sensing from 10 to 200 mm. Its 660 nm red LED directs light toward the target, while returned light provides the sensing information without a separate reflector. The sensor operates from 10 to 30 VDC and uses an M12 connector for detachable electrical connection. Light-ON or Dark-ON operation can be selected, while a two-turn endless adjuster supports sensitivity setting. Response time is specified at 0.5 ms and load current at up to 100 mA. Within the E3S Series, the E3S-AD86 provides the vertical PNP connector option. Related PNP diffuse-reflective sensors can be reviewed across Omron Industrial Products.
| Brand | Omron |
| Product | Photoelectric Sensors |
| Model Number | E3S-AD86 |
Omron E3S-AD86 Photoelectric Sensor – Technical Specifications
| Specification | Value |
|---|---|
| Sensing Method | Diffuse-reflective Sensors |
| Sensing Distance | 10 to 200 mm (white paper 100 × 100 mm) |
| Light Source | Red LED (660 nm) |
| Power Supply Voltage | 10 to 30 VDC, including ripple (p-p) 10% |
| Output Configuration | PNP |
| Connection Method | Connector (M12) |
| Current Consumption | 30 mA max. (plus approx. 15 mA with turbo function) |
| Control Output | Load power supply voltage: 30 VDC max., Load current: 100 mA max. (residual voltage: 1 V max.) |
| Operation Mode | Light-ON/Dark-ON selectable |
| Response Time | Operation or reset: 0.5 ms max. |
| Sensitivity Adjustment | Two-turn endless adjuster with an indicator |
| Ambient Illumination | Incandescent lamp: 5,000 lx max. Sunlight: 10,000 lx max. |
| Ambient Temperature Range | Operating: −25°C to 55°C (with no icing or condensation) Storage: −40°C to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating: 35% to 85% (with no condensation) Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | 20 MΩ min. at 500 VDC between current-carrying parts and case |
| Dielectric Strength | 1,000 VAC, 50/60 Hz for 1 min. between current-carrying parts and case |
| Vibration Resistance | 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500m/s2, 3 times each in X, Y, and Z directions |
| Protection Circuits | Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention |
| Degree Of Protection | IEC IP67; NEMA: 4X (indoors only) |
| Material | PBT, Denatured polyallylate, Stainless steel (SUS304) |
| Weight | Approx. 50 g |
The Omron E3S-AD86 Photoelectric Sensor uses diffuse-reflective sensing with a built-in amplifier for direct object sensing from 10 to 200 mm using a 100 × 100 mm white-paper reference target. Its 660 nm red LED provides the optical source, while the PNP output transfers the switching state to compatible machine-control equipment. The sensor operates from 10 to 30 VDC and uses an M12 connector for detachable electrical connection. Current consumption is specified at 30 mA maximum, with approximately 15 mA additional current when the turbo function is active. Load current is rated up to 100 mA. Light-ON or Dark-ON operation can be selected, while a two-turn endless adjuster supports sensitivity setting. Operation or reset time is specified at 0.5 ms maximum.
For an Omron PNP diffuse reflective photoelectric sensor requiring a vertical housing, M12 connection, and 10 to 200 mm sensing, the relevant model is the E3S-AD86. Operating temperature extends from -25 to 55°C, while storage ranges from -40 to 70°C without icing or condensation. Power-supply reverse polarity, output short-circuit, and mutual-interference prevention are listed. PBT, denatured polyallylate, and SUS304 are among the stated materials. Its specification also suits searches for an Omron M12 PNP sensor and Omron 200 mm diffuse sensor. For a related E3S NPN diffuse-reflective model using a 2 m pre-wired cable, see E3S-AD11 2M.
