Omron TL-N5ME2 2M Proximity Sensor
Omron TL-N5ME2 2M uses a rectangular unshielded inductive sensing design with a 5 mm sensing distance and a 0 to 4 mm setting distance. Its DC 3-wire NPN output operates in NC mode through a pre-wired 2 m cable on a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, using an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 500 Hz, current consumption is 8 mA max. at 12 VDC and 15 mA max. at 24 VDC, while differential travel is 15% max. of sensing distance. A red detection indicator and IP67 protection are listed. The TL-N5ME2 2M appears under NPN proximity sensors from Omron sensing products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | TL-N5ME2 2M |
Omron TL-N5ME2 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Rectangular |
| Mounting | Unshielded |
| Sensing Distance | 5 mm |
| Setting Distance | 0 to 4 mm |
| Output Configuration | DC 3-wire, NPN |
| Operation Mode | NC |
| Connection | Pre Wired Cable Length 2M |
| Power Supply Voltage | 12 to 24 VDC. |
| Standard Target | Iron, 30 × 30 × 1 mm |
| Differential Travel | 15% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 500 Hz |
| Current Consumption | 8 mA max. at 12 VDC, 15 mA max. at 24 VDC |
| Indicator | Detection indicator (red) |
| Protection Circuit | Reverse polarity protection, Surge suppressor |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range |
| Degree Of Protection | IP67 |
| Weight | Approx. 190 g |
The Omron TL-N5ME2 2M Proximity Sensor combines a rectangular unshielded inductive sensing body with a 5 mm sensing distance and a 0 to 4 mm setting distance. Its DC 3-wire NPN output operates in NC mode through a pre-wired 2 m cable and works from 12 to 24 VDC. Ferrous metal is specified as the detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 500 Hz, current consumption is 8 mA max. at 12 VDC and 15 mA max. at 24 VDC, while differential travel is 15% max. of sensing distance. A red detection indicator, reverse-polarity protection, and surge suppression are specified.
Environmental limits for the TL-N5ME2 are -25 to 70°C during operation and -40 to 85°C during storage, with humidity from 35% to 95%. Temperature influence is ±10% max. of sensing distance at 23°C across -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1,000 VAC for 1 minute, and voltage influence is ±2.5% max. within rated voltage ±10%. IP67 protection is listed. For another rectangular proximity sensor retaining 5 mm sensing, DC 3-wire NPN wiring, and a pre-wired 2 m cable but using NO operation, see TL-Q5MC1 2M.
