Omron E2E-X3D2-N 2M Proximity Sensor
Omron E2E-X3D2-N 2M is an M12 shielded inductive proximity sensor with a 3 mm sensing distance and a 0 to 2.4 mm setting distance. Its electrical configuration is DC 2-wire with NC operation, using a pre-wired 2 m oil-resistant PVC cable and a 12 to 24 VDC supply. Ferrous metal is listed as the detectable object, with an iron 12 × 12 × 1 mm standard sensing object. Leakage current is 0.8 mA max., response frequency is 1 kHz, and differential travel is 10% max. of sensing distance. A red operation indicator, surge suppression, load short-circuit protection, and IP67 protection are specified. The E2E-X3D2-N belongs to the Proximity sensor range from Omron sensing products.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X3D2-N 2M |
Omron E2E-X3D2-N 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M12 |
| Mounting | Shielded |
| Sensing Distance | 3 mm |
| Setting Distance | 0 to 2.4 mm |
| Output Configuration | DC 2-wire |
| Operation Mode | NC |
| Connection | Pre Wired, Length 2M |
| Cable Specifications | PVC (oil-resistant) |
| Power Supply Voltage | 12 to 24 VDC |
| Standard Target | Iron, 12 × 12 × 1 mm |
| Leakage Current | 0.8 mA max. |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 1 kHz |
| Indicator | Operation indicator (red) |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree Of Protection | IP67 |
The Omron E2E-X3D2-N 2M Proximity Sensor is an M12 shielded inductive model built around a 3 mm sensing distance and a 0 to 2.4 mm setting distance. It uses a DC 2-wire output with NC operation and a pre-wired 2 m oil-resistant PVC cable. Supply voltage is 12 to 24 VDC. The specified detectable object is ferrous metal, and the standard sensing object is iron measuring 12 × 12 × 1 mm. Leakage current is 0.8 mA max., response frequency is 1 kHz, and differential travel is 10% max. of sensing distance. A red operation indicator is provided, while the protection circuit contains a surge suppressor and load short-circuit protection for the control and diagnostic output.
The operating range extends from -25 to 70°C and storage from -40 to 85°C without icing or condensation, with 35% to 95% humidity. Temperature influence is ±10% max. of sensing distance at 23°C over the operating temperature range. Insulation resistance is 50 MΩ min. at 500 VDC and dielectric strength is 1000 VAC for 1 minute. Voltage influence is ±1% max. within rated voltage ±15%, and degree of protection is IP67. For the corresponding M12 shielded 3 mm E2E version using the same 2 m connection format but NO rather than NC operation, see E2E-X3D1-N 2M.
