Omron E2E-X2D1-M1G Proximity Sensor
Omron E2E-X2D1-M1G is an M8 shielded inductive proximity sensor with a 2 mm sensing distance and a 0 to 1.6 mm setting distance. It uses a DC 2-wire NO output, an M12 connector, and a 12 to 24 VDC power supply. Ferrous metal is the specified detectable object, with an iron 8 × 8 × 1 mm standard sensing object. Leakage current is 0.8 mA max., response frequency is 1.5 kHz, and differential travel is 15% max. of sensing distance. Red and green indicators provide operation and setting indication, while surge suppression, load short-circuit protection, and IP67 protection are specified. The E2E-X2D1-M1G sits within the DC proximity sensor category from the Omron sensor product range.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X2D1-M1G |
Omron E2E-X2D1-M1G Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M8 |
| Mounting | Shielded |
| Sensing Distance | 2 mm |
| Setting Distance | 0 to 1.6 mm |
| Output Configuration | DC 2-Wire |
| Operation Mode | No |
| Connection | M12 Connector |
| Power Supply Voltage | 12 to 24 VDC |
| Standard Target | Iron, 8 × 8 × 1 mm |
| Leakage Current | 0.8 mA max. |
| Differential Travel | 15% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 1.5 kHz |
| Indicator | Operation indicator (red) and setting indicator (green) |
| Protection Circuit | Surge suppressor, Load short-circuit protection (for control and diagnostic output) |
| Ambient Temperature Range | Operating: −25 to 70°C, Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±15% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree Of Protection | IP67 |
| Weight | Approx. 15 g |
The Omron E2E-X2D1-M1G Proximity Sensor combines an M8 shielded inductive sensing head with a 2 mm sensing distance and a 0 to 1.6 mm setting distance. It uses a DC 2-wire output with NO operation and an M12 connector, operating from a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, with an iron 8 × 8 × 1 mm standard sensing object. Leakage current is 0.8 mA max., response frequency is 1.5 kHz, and differential travel is 15% max. of sensing distance. Red and green indicators provide operation and setting indication. Surge suppression and load short-circuit protection are specified for the control and diagnostic output.
The sensor operates from -25 to 70°C and stores from -40 to 85°C without icing or condensation, with 35% to 95% humidity. Temperature influence is ±15% max. of sensing distance at 23°C across -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1000 VAC for 1 minute, and voltage influence is ±1% max. within rated voltage ±15%. Degree of protection is IP67. Within the same E2E M8 shielded 2 mm connector family, the closely corresponding model changes the DC 2-wire switching state from NO to NC while retaining the M12 connector: E2E-X2D2-M1G.
