Omron E2E-X10MF1 2M Proximity Sensor
Omron E2E-X10MF1 2M is an M18 unshielded inductive proximity sensor with a 10 mm sensing distance and a 0 to 8 mm setting distance. It uses a PNP DC 3-wire output with NO operation, a pre-wired 2 m oil-resistant PVC cable, and a 12 to 24 VDC supply. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.2 kHz, current consumption is 13 mA max., and differential travel is 10% max. A red operation indicator and IP67 protection are specified. The E2E-X10MF1 2M is listed under PNP proximity sensors from Omron industrial sensors.
| Brand | Omron |
| Product | Proximity Sensors |
| Model Number | E2E-X10MF1 2M |
Omron E2E-X10MF1 2M Proximity Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Sensor | Inductive |
| Size | M18 |
| Mounting | Unshielded |
| Sensing Distance | 10 mm |
| Setting Distance | 0 to 8 mm |
| Output Configuration | PNP, DC 3 Wire |
| Operation Mode | NO |
| Connection | Pre Wired, Length 2M |
| Cable Specifications | PVC (oil-resistant) |
| Power Supply Voltage | 12 to 24 VDC |
| Body Material | Stainless steel |
| Standard Target | Iron, 30 × 30 × 1 mm |
| Differential Travel | 10% max. of sensing distance |
| Detectable Object | Ferrous metal (The sensing distance decreases with non-ferrous metal.) |
| Response Frequency | 0.2 kHz |
| Current Consumption | 13 mA max. |
| Indicator | Operation indicator (red) |
| Protection Circuit | Load short-circuit protection, Surge suppressor, Reverse polarity protection |
| Ambient Temperature Range | Operating/Storage: −40 to 85°C (with no icing or condensation) |
| Ambient Humidity Range | Operating/Storage: 35% to 95% (with no condensation) |
| Insulation Resistance | ±15% max. of sensing distance at 23°C in the temperature range of −40 to 85°C ±10% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
| Dielectric Strength | 50 MΩ min. (at 500 VDC) between current-carrying parts and case |
| Vibration Resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
| Voltage Influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range |
| Degree Of Protection | IP67 |
| Weight | Approx. 195 g |
The Omron E2E-X10MF1 2M Proximity Sensor uses an M18 unshielded inductive sensing body with a 10 mm sensing distance and a 0 to 8 mm setting distance. It provides a PNP DC 3-wire output with NO operation through a pre-wired 2 m oil-resistant PVC cable and operates from 12 to 24 VDC. Ferrous metal is the specified detectable object, with an iron 30 × 30 × 1 mm standard sensing object. Response frequency is 0.2 kHz, current consumption is 13 mA max., and differential travel is 10% max. of sensing distance. A red operation indicator is provided, while load short-circuit protection, surge suppression, and reverse-polarity protection are specified.
Operating and storage conditions for the E2E-X10MF1 extend from -40 to 85°C, with humidity from 35% to 95%. Temperature influence is ±15% max. of sensing distance at 23°C across -40 to 85°C and ±10% max. across -25 to 70°C. Insulation resistance is 50 MΩ min. at 500 VDC, dielectric strength is 1,000 VAC for 1 minute, and voltage influence is ±1% max. within rated voltage ±15%. Stainless steel is listed for the body and IP67 for protection. For another pre-wired E2E model with an M18 body but a 5 mm sensing distance and NPN NC output, see E2E-X5E2 2M.
