+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-24024AP Power Supply

Omron S8VS-24024AP SMPS is a 240 W switch mode power supply configured to provide 24 VDC with 10 A rated output current. It operates from 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for organized electrical-cabinet installation. Screw terminals and terminal blocks provide fixed input and output wiring connections. Typical efficiency is specified at 85% with 100 VAC input and 88% with 200 VAC input. A green output indicator provides operating status. The 24 VDC output and 10 A capacity define this 240 W configuration within the family. Within the S8VS Series, the S8VS-24024AP provides a DIN rail 240 W, 24 VDC configuration. Compare other 24V power supplies from Omron industrial controls.

Omron S8VS-24024AP Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-24024AP

Omron S8VS-24024AP Power Supply - Technical Specifications

SpecificationValue
Power rating240 W
Output voltage24 VDC
Rated output current10 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85% typ. (at 100 VAC input) 88% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current3.8 A max., 2.9 A typ. (at 100 VAC input) 2 A max., 1.5 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time510 ms typ. (at 100 VAC input) 510 ms typ. (at 200 VAC input)
Hold time46 ms typ. (at 100 VAC input) 46 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight1150 g max.

The Omron S8VS-24024AP Power Supply provides 240 W rated power with a 24 VDC output and 10 A rated current. It operates from 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured cabinet installation. Typical efficiency is specified at 85% with 100 VAC input and 88% with 200 VAC input. These specifications define a 24 VDC supply where connected load voltage, total current requirement, source compatibility, rail space, and terminal access should be checked together. Connected equipment should require 24 VDC and keep continuous current demand within the rated 10 A output. The green output indicator gives a simple visual reference for output operating status. The fixed wiring arrangement provides dedicated connection points for the input source and downstream DC circuit.

Comparing same-output-voltage models helps separate load compatibility from available current capacity. A model with the same 240 W, 24 VDC, 10 A ratings may still represent a different configuration within the S8VS family, while lower-power versions provide less current for smaller loads. This makes model selection depend on current demand, series configuration, and installation requirements rather than wattage alone. For another 240 W DIN rail configuration providing 24 VDC at 10 A, compare the Omron S8VS-24024A.