+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VS-18024 Power Supply

Omron S8VS-18024 SMPS is a 180 W switch mode power supply designed to provide 24 VDC with 7.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting for organized installation inside electrical cabinets. Screw terminals and terminal blocks provide fixed input and output wiring connections. Typical efficiency is specified at 85% with 100 VAC input and 88% with 200 VAC input. A green output indicator provides operating status. Within the S8VS Series, the S8VS-18024 provides a DIN rail 180 W, 24 VDC configuration. Compare other 180W 24V power supplies from Omron industrial controls.

Omron S8VS-18024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VS-18024

Omron S8VS-18024 Power Supply - Technical Specifications

SpecificationValue
Power rating180 W
Output voltage24 VDC
Rated output current7.5 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85% typ. (at 100 VAC input) 88% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.9 A max., 2.2 A typ. (at 100 VAC input) 1.6 A max., 1.1 A typ. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15% With V.ADJ
Start-up time570 ms typ. (at 100 VAC input) 470 ms typ. (at 200 VAC input)
Hold time58 ms typ. (at 100 VAC input) 62 ms typ. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 60 ?
Ambient temperature (Storage)-25 to 65 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanNo
Weight850 g max.

The Omron S8VS-18024 Power Supply provides 180 W rated power with a 24 VDC output and 7.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for control-panel installation. Typical efficiency is specified at 85% with 100 VAC input and 88% with 200 VAC input. These electrical values define a 24 VDC supply where connected load voltage, continuous current demand, incoming source, DIN rail space, and terminal access should be checked together. Connected equipment should require 24 VDC and keep combined current demand within the rated 7.5 A output. The fixed terminal arrangement provides defined input and output wiring points for cabinet integration.

Within the S8VS family, current capacity rises as rated power increases while the 24 VDC output can remain unchanged. A 90 W model provides 3.75 A, which is half the current rating of this 180 W configuration. This same-voltage comparison helps separate the required load voltage from the amount of available output current. A lower-power model may be sufficient when connected demand is below 7.5 A, reducing unnecessary capacity. For a lower-capacity DIN rail configuration providing 90 W, 24 VDC, and 3.75 A output, compare the Omron S8VS-09024AP.