+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-WB24024 Power Supply

Omron S8VK-WB24024 SMPS is a 240 W switch mode power supply designed to provide 24 VDC with 10 A rated output current. The supplied specifications identify a 200 to 240 VAC input range at 50/60 Hz with three-phase, single-phase, or two-phase connection configurations. DIN rail mounting supports structured panel installation, while push-in terminals and terminal blocks provide fixed wiring connections. Typical efficiency values vary by input configuration, with up to 94% specified in the supplied data. A green LED provides output status indication. The 24 VDC output and 10 A rating define this 240 W configuration. Within the S8VK-WB Series, the S8VK-WB24024 provides a DIN rail 240 W, 24 VDC configuration. Compare other 24V DIN rail power supplies from Omron automation products.

Omron S8VK-WB24024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-WB24024

Omron S8VK-WB24024 Power Supply - Technical Specifications

SpecificationValue
Power rating240 W
Output voltage24 VDC
Rated output current10 A
Terminal typePush-in Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency89% min., 94% typ. (at three-phase 380 VAC input) 93% typ. (at two-phase 380 VAC input) 89% min., 93% typ. (Three-phase 400 VAC input) 93% typ. (Two-phase 400 VAC input) 87% min., 92% typ. (at three-phase 480 VAC input) 92% typ. (at two-phase 480 VAC input)
Rated input voltage200 to 240 VAC(Three-phase/single-phase/two-phase)
Rated input current0.5 A max., 0.43 A typ. (at three-phase 380 VAC input) 0.90 A max., 0.80 A typ. (at two-phase 380 VAC input) 0.50 A max., 0.41 A typ. (Three-phase 400 VAC input) 0.85 A max., 0.75 A typ. (Two-phase 400 VAC input) 0.40 A max., 0.36 A typ. (at three-phase 480 VAC input) 0.70 A max., 0.63 A typ. (at two-phase 480 VAC input)
Input Leakage current3.5 mA max. (Three-phase 400 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (LED: Green)
Output voltage variable range24 to 29.5 V (with V.ADJ)
Start-up time1000 ms max. (Three-phase 400 VAC input)
Hold time16 ms min., 30 ms typ. (Three-phase 400 VAC input)
Vibration resistance10 to 55 Hz, maximum 5 G, 0.42 mm single amplitude for 2 h each in X, Y, and Z directions
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)?40 to 70°C
Ambient temperature (Storage)?40 to 85°C
Ambient humidity (OperatingStorage)95% max. (Storage humidity: 95% max.)
Cooling fanNo
Degree of protectionIP20 by EN/IEC 60529
Weight890 g max.

The Omron S8VK-WB24024 Power Supply provides 240 W rated power with a 24 VDC output and 10 A rated current. The supplied specifications identify 200 to 240 VAC operation at 50/60 Hz with three-phase, single-phase, or two-phase connection configurations. DIN rail mounting, push-in terminals, and terminal blocks provide the installation and wiring arrangement. The supplied efficiency values vary by input configuration, with typical values reaching 94%. These characteristics define a 24 VDC DIN rail supply where connected current demand, input arrangement, available rail space, and terminal access should be considered together. Connected equipment should require 24 VDC and keep continuous current within the rated 10 A output.

The supplied S8VK-WB data contains input-related values that should be checked against the applicable manufacturer specification when final electrical sizing is performed. For model comparison, the 24 VDC output and 10 A rated current can be used to distinguish this 240 W configuration from the 480 W version. The higher-power WB model doubles the rated output current while retaining 24 VDC. For a 480 W DIN rail configuration providing 24 VDC at 20 A, compare the Omron S8VK-WB48024.