+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8VK-C12024 SMPS 24V 5A Power Supply

Omron S8VK-C12024 SMPS is a 120 W switch mode power supply configured to provide 24 VDC with 5 A rated output current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and operates at 50/60 Hz. Typical efficiency is specified at 88%, and a green output indicator provides operating status. Its 24 VDC output and 5 A capacity provide twice the rated current of the 60 W S8VK-C06024 while remaining in the same voltage class. The unit carries an IP20 protection rating for its enclosure arrangement. Within the S8VK-C Series, the S8VK-C12024 provides a 120 W, 24 VDC configuration. Compare other 120W power supplies from Omron machine control products.

Omron S8VK-C12024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8VK-C12024

Omron S8VK-C12024 SMPS 24V 5A Power Supply – Technical Specifications

SpecificationValue
Power rating120 W
Output voltage24 VDC
Rated output current5A
Efficiency88%
Rated input voltageSingle-phase 100 to 240 VAC 90 to 350 VDC
Input Frequency50/60 Hz (47 to 450 Hz)
Current 115 VAC input2.2 A
Current 230 VAC input0.7A
Output Voltage adjustment range–10% to 15% (with V.ADJ)
Overvoltage protectionYes
Parallel operationNo
Ambient operating temperature–25 to 60°C (Refer to Engineering Data)
Ambient operating humidity20% to 90% (Storage humidity: 10% to 95%)
Output indicatorYes (color: green), lighting from 80% to 90% or more of rated voltage
Safety standardsUL Listed: UL508 (Listing)UL UR: UL No. 62368-1 (Recognition)cUL: CSA C22.2 No.107.1cUR: CSA C22.2 No.62368-1EN: EN 62477-1, EN 62368-1BIS: IS 13252 (Part1)
Degree of protectionIP20 by EN / IEC60529

The Omron S8VK-C12024 Power Supply provides 120 W rated power with a 24 VDC output and 5 A rated current. It accepts single-phase 100 to 240 VAC or 90 to 350 VDC input and has a stated efficiency of 88%. A green output indicator provides operating status, and an IP20 protection rating is specified for the unit. These values define a 24 VDC supply where connected equipment voltage, combined load current, source compatibility, installation space, and wiring arrangement should be reviewed together. The connected load should require 24 VDC and remain within the rated 5 A current capacity.

When comparing this model with other S8VK-C power levels, the nominal 24 VDC output can remain unchanged while available current increases with rated power. Selection should therefore be based on actual current demand after output-voltage compatibility is confirmed. A larger wattage alone does not require changing the load voltage. For a higher-capacity 24 VDC configuration delivering 20 A from 480 W, compare the Omron S8VK-C48024.