Omron S8TS-06024 Power Supply
Omron S8TS-06024 SMPS is a 60 W switch mode power supply configured to provide 24 VDC with 2.5 A rated output current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured panel installation. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. A green output indicator provides operating status at the unit. The 24 VDC output and 2.5 A current rating distinguish this model from the lower-voltage S8TS configurations. Within the S8TS Series, the S8TS-06024 provides a DIN rail 60 W, 24 VDC configuration. Compare other 60W 24V power supplies from Omron control products.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8TS-06024 |
Omron S8TS-06024 Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 60 W |
| Output voltage | 24 VDC |
| Rated output current | 2.5 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 80% typ. (at 100 VAC input) 80% typ. (at 200 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 1 A max. (at single operation, 100 VAC input) 0.5 A max. (at single operation, 200 VAC input) |
| Input Leakage current | 0.35 mA max. (at 100 VAC input) 0.7 mA max. (at 240 VAC input) |
| Input Frequency | 50/60Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | 22 to 28 V (With V.ADJ) |
| Start-up time | 1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input) |
| Hold time | 20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 50 ? |
| Ambient temperature (Storage) | -25 to 65 ? |
| Ambient humidity (OperatingStorage) | 25 to 85% |
| Cooling fan | No |
| Weight | 450 g max. |
The Omron S8TS-06024 Power Supply provides 60 W rated power with a 24 VDC output and 2.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for panel installation. Typical efficiency is specified at 80% with both 100 VAC and 200 VAC input. These electrical values define a 24 VDC configuration where connected load voltage, current demand, incoming source compatibility, DIN rail space, and terminal access should be reviewed together. Connected equipment should require 24 VDC and keep combined current demand within the rated 2.5 A output. The available DIN rail area should therefore be confirmed before installation.
The incoming AC specification describes the source feeding the supply, while the 24 VDC rating describes compatibility with downstream loads. Comparing it with a 12 VDC model should focus first on output-voltage requirements because both models can have the same 2.5 A rated current while serving different load voltages. For a 30 W DIN rail model delivering 12 VDC at 2.5 A, compare the Omron S8TS-03012F.


