+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8JX-P30005C Power Supply

Omron S8JX-P30005C SMPS is a 300 W switch mode power supply designed to provide 5 VDC for industrial control equipment requiring high output current. It delivers 60 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz, with an 80 to 370 VDC input range also specified. Front mounting supports panel installation, while screw terminals and terminal blocks provide fixed electrical connections. Typical efficiency is specified at 75% with both 100 VAC and 200 VAC input. The 5 VDC output and 60 A capacity distinguish this model as a low-voltage, high-current configuration. Within the S8JX-P Series, the S8JX-P30005C provides a front-mount 300 W, 5 VDC configuration. Compare other 5V industrial power supplies from Omron industrial automation.

Omron S8JX-P30005C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8JX-P30005C

Omron S8JX-P30005C Power Supply - Technical Specifications

SpecificationValue
Power rating300 W
Output voltage5 VDC
Rated output current60 A
Terminal typeScrew Terminal
Mounting methodFront mounting
ConnectionTerminal blocks
Efficiency75% typ. (at 100 VAC input) 75% typ. (at 200 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.5 A max. (at 100 VAC input) 2.2 A max. (at 200 VAC input)
Input Leakage current0.5 mA max. (at 100 VAC input) 1.0 mA max. (at 200 VAC input)
Input Frequency50/60Hz
Output indicatorYes (color: green)
Output voltage variable range±10% (With V.ADJ)
Start-up time1000 ms typ. (at 100 VAC input) 1000 ms typ. (at 200 VAC input)
Hold time20 ms min. (at 100 VAC input) 20 ms min. (at 200 VAC input)
Vibration resistance10 to 55 Hz, 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-10 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)25 to 85%
Cooling fanYes
Weight1200 g max.

The Omron S8JX-P30005C Power Supply provides 300 W rated power with a 5 VDC output and 60 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and also supports an 80 to 370 VDC input range. Front mounting, screw terminals, and terminal blocks define the installation and wiring arrangement for this model. Typical efficiency is specified at 75% with both 100 VAC and 200 VAC input. These specifications establish the S8JX-P30005C as a low-voltage, high-current supply where 5 VDC compatibility should be confirmed before current demand, incoming source, or mounting arrangement is evaluated. Connected equipment should require 5 VDC and keep total load current within the stated 60 A rating.

Front mounting requires suitable panel space and access, while screw terminals provide fixed wiring points for source and load conductors. The AC and DC input ranges describe source-side compatibility independently from the 5 VDC output requirement. When comparing another model with the same 300 W rated power, output voltage and available current should be checked first because different voltage configurations are intended for different DC loads. For a 300 W front-mount model delivering 12 VDC at 27 A, compare the Omron S8JX-P30012N.