+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G60024CD Power Supply

Omron S8FS-G60024CD SMPS is a 600 W switch mode power supply designed to provide 24 VDC with a rated output current of 27 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals for structured electrical-panel installation. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. The rail-mounted format combines higher-current 24 VDC output with organized cabinet placement and fixed electrical connections through terminal blocks. Within the S8FS-G Series, the S8FS-G60024CD provides a DIN rail 600 W, 24 VDC configuration. Compare other DIN rail power supplies from Omron industrial controls.

Omron S8FS-G60024CD Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G60024CD

Omron S8FS-G60024CD Power Supply - Technical Specifications

SpecificationValue
Power rating600 W
Output voltage24 VDC
Rated output current27 A
Terminal typeScrew Terminal
Mounting methodDIN rail
ConnectionTerminal blocks
Efficiency85 % typ.(at 100 VAC input) 89 % typ.(at 200 VAC input) 90 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current7.7 A typ.(at 100 VAC input) 3.8 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time30 ms typ.(at 100 VAC input) 30 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight1050 g max.

The Omron S8FS-G60024CD Power Supply provides 600 W rated power with a 24 VDC output and 27 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses DIN rail mounting with screw terminals and terminal blocks for structured control-panel installation. Typical efficiency is specified at 85% with 100 VAC input, 89% with 200 VAC input, and 90% with 230 VAC input. These specifications position the model as a high-current DIN rail 24 VDC supply where load voltage, current requirement, source compatibility, rail availability, and wiring access should be considered together. Connected equipment should operate from 24 VDC and keep combined current demand within the stated 27 A output. DIN rail space should be confirmed during enclosure planning.

Screw terminals provide the fixed electrical interface for source and load wiring, while the input range should be matched independently to the available AC source. Comparing another DIN rail model with the same 24 VDC output gives direct capacity context because both mounting and nominal voltage remain aligned. A lower-wattage unit can therefore show whether the full 600 W capacity is required. For a 25 W DIN rail configuration supplying 24 VDC at 1.1 A, compare the Omron S8FS-C02524D.