+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G30024C-H Power Supply

Omron S8FS-G30024C-H SMPS is a 300 W switch mode power supply configured to provide 24 VDC with a rated output current of 14 A. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed electrical-panel installation. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. The direct-mount arrangement positions the unit on a panel surface while terminal blocks provide the fixed wiring interface for connected circuits. Within the S8FS-G Series, the S8FS-G30024C-H provides a direct-mount 300 W, 24 VDC configuration. Compare other 300W industrial power supplies from Omron control equipment.

Omron S8FS-G30024C-H Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G30024C-H

Omron S8FS-G30024C-H Power Supply - Technical Specifications

SpecificationValue
Power rating300 W
Output voltage24 VDC
Rated output current14 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency82 % typ.(at 100 VAC input) 87 % typ.(at 200 VAC input) 87 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current4.2 A typ.(at 100 VAC input) 2.1 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time40 ms typ.(at 100 VAC input) 40 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanYes
Weight700 g max.

The Omron S8FS-G30024C-H Power Supply provides 300 W rated power with a 24 VDC output and 14 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals and terminal blocks for fixed panel installation. Typical efficiency is specified at 82% with 100 VAC input and 87% with both 200 VAC and 230 VAC input. These electrical values establish the model as a higher-current 24 VDC supply where connected load voltage and current demand form the primary selection criteria. Equipment supplied by this model should specifically require 24 VDC, and combined current demand should remain within the stated 14 A output rating before panel layout and source compatibility are evaluated.

Direct mounting requires suitable fixed panel area, while screw terminals provide defined electrical connection points for incoming and outgoing wiring. The 100 to 240 VAC input range describes source compatibility independently from the 24 VDC load requirement. A comparison with another 24 VDC model provides more useful capacity information than comparison with an unrelated voltage class. For a lower-capacity DIN rail configuration delivering 24 VDC at 3.2 A from a 75 W rating, compare the Omron S8FS-C07524D.