Omron S8FS-G15024C-500 Power Supply
Omron S8FS-G15024C-500 SMPS is a 150 W switch mode power supply configured to provide 24 VDC with a rated output current of 6.5 A. It uses single-phase input, direct mounting, screw terminals, and terminal blocks for fixed panel installation. Rated input is 100 to 240 VAC, while allowable input extends from 85 to 264 VAC and 80 to 370 VDC. Typical efficiency is 87% at 100 VAC input and 89% at both 200 VAC and 230 VAC input. The covered design defines the physical configuration of this version. Within the S8FS-G Series, the S8FS-G15024C-500 provides a direct-mount 150 W, 24 VDC configuration. Compare other 24V SMPS power supplies from Omron machine automation.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-G15024C-500 |
Omron S8FS-G15024C-500 Power Supply – Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 150 W |
| Output voltage | 24 VDC |
| Rated output current | 6.5 A |
| Terminal type | Screw terminal |
| Phase | Single-phase |
| Mounting method | Direct mounting |
| Construction | Covered type |
| Connection | Terminal blocks |
| Efficiency | 87 % typ. (at 100 VAC input) 89 % typ. (at 200 VAC input) 89 % typ. (at 230 VAC input) |
| Rated input voltage | 100 to 240 VAC |
| Rated input current | 3 A typ. (at 100 VAC input) 1.8 A typ. (at 200 VAC input) |
| Input Leakage current | 0.5 mA max. (at 100 VAC input) 1 mA max. (at 200 VAC input) |
| Input Frequency | 50/60Hz (47 to 450 Hz) |
| Allowable input voltage variable range | 85 to 264 VAC (Single-phase) 80 to 370 VDC |
| Overvoltage protection | Yes, Shut off the input voltage and turn on the input again |
| Parallel operation | No (However, backup operation is possible, external diodes required.) |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10 to +15 % (With V.ADJ) |
| Hold time | 10 ms typ. (at 100 VAC input) 55 ms typ. (at 200 VAC input) |
| Vibration resistance | 10 to 55 Hz, 4.5 G max., 0.375 mm Single amplitude in each 3 directions for 2 hours |
| Shock resistance | 150 m/s2, in each 6 directions 3 times |
| Ambient temperature (Operating) | -20 to 70 ? |
| Ambient temperature (Storage) | -25 to 75 ? (with no freezing or condensation) |
| Ambient humidity (OperatingStorage) | 90 %RH max. |
| Cooling fan | Cooling fan No |
| Weight (Main) | 500 g max. |
The Omron S8FS-G15024C-500 Power Supply provides 150 W rated power with a 24 VDC output and 6.5 A rated current. It uses single-phase input, direct mounting, screw terminals, and terminal blocks for fixed panel installation. Rated input is 100 to 240 VAC, while allowable supply ranges extend from 85 to 264 VAC and 80 to 370 VDC. Typical efficiency is specified at 87% with 100 VAC input and 89% with both 200 VAC and 230 VAC input. These specifications establish the model as a direct-mount 24 VDC configuration where load current, incoming supply, panel arrangement, and wiring access should be considered together during selection.
The connected equipment should specifically require 24 VDC and keep its combined current demand within the 6.5 A output rating. Direct mounting requires suitable panel surface, while screw terminals provide fixed electrical connections for input and load conductors. The allowable AC and DC ranges define source-side compatibility separately from the nominal 24 VDC load requirement. Comparing another direct-mount model with the same voltage provides a clearer view of available capacity differences. For a lower-power 24 VDC configuration rated at 100 W with 4.5 A output current, compare the Omron S8FS-C10024J.


