+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-G10012C Power Supply

Omron S8FS-G10012C SMPS is a 100 W switch mode power supply designed to provide 12 VDC for industrial control equipment. It delivers 8.5 A rated output current and accepts 100 to 240 VAC input at 50/60 Hz. Direct mounting supports fixed panel installation, while screw terminals provide secure input and output connections. Typical efficiency is specified at 84% with 100 VAC input and 86% with both 200 VAC and 230 VAC input. A green indicator provides output status during operation. Within the S8FS-G Series, the S8FS-G10012C provides a direct-mount 100 W, 12 VDC configuration. Compare other 100W 12V power supplies from Omron machine automation.

Omron S8FS-G10012C Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-G10012C

Omron S8FS-G10012C Power Supply - Technical Specifications

SpecificationValue
Power rating100 W
Output voltage12 VDC
Rated output current8.5 A
Terminal typeScrew Terminal
Mounting methodDirect Mounting
ConnectionTerminal blocks
Efficiency84 % typ.(at 100 VAC input) 86 % typ.(at 200 VAC input) 86 % typ.(at 230 VAC input)
Rated input voltage100 to 240 VAC
Rated input current2.1 A typ.(at 100 VAC input) 1.2 A typ.(at 200 VAC input)
Input Leakage current0.5 mA max.(at 100 VAC input) 1 mA max.(at 200 VAC input)
Input Frequency50/60 Hz
Output indicatorYes (color: green)
Output voltage variable range-10 to +15 % (With V.ADJ)
Start-up time1000 ms max.(at 100 VAC input) 1000 ms max.(at 200 VAC input)
Hold time11 ms typ.(at 100 VAC input) 55 ms typ.(at 200 VAC input)
Vibration resistance10 to 55 Hz, 4.5 G max., 0.375 mm single amplitude in each 3 directions for 2 hours
Shock resistance150 m/s2, in each 6 directions 3 times
Ambient temperature (Operating)-20 to 70 ?
Ambient temperature (Storage)-25 to 75 ?
Ambient humidity (OperatingStorage)90 %RH max.
Cooling fanNo
Weight400 g max.

The Omron S8FS-G10012C Power Supply provides 100 W rated power with a 12 VDC output and 8.5 A rated current. It accepts 100 to 240 VAC input at 50/60 Hz and uses direct mounting with screw terminals for fixed panel installation. Typical efficiency is 84% at 100 VAC input and 86% at both 200 VAC and 230 VAC input. A green output indicator provides operating status. These specifications position the model in the 12 VDC class, where load voltage, current demand, source voltage, mounting surface, and terminal access should be evaluated as separate but connected requirements.

The connected equipment should operate from 12 VDC and remain within the 8.5 A rated output. Direct mounting requires sufficient panel area, while screw terminals establish the fixed wiring arrangement. A higher-capacity model with the same 12 VDC output provides a direct comparison of available power and current. For a 300 W direct-mount configuration delivering 12 VDC at 25 A, compare the Omron S8FS-G30012C.