+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C20012 Power Supply

Omron S8FS-C20012 SMPS is a 200 W switch mode power supply configured to provide 12 VDC for industrial control equipment requiring up to 17 A rated output current. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 87% and supports 100 to 240 VAC rated input, with allowable ranges of 90 to 264 VAC and 254 to 373 VDC. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C20012 provides a direct-mount 200 W, 12 VDC configuration. Compare other 200W 12V power supplies from Omron control equipment.

Omron S8FS-C20012 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C20012

Omron S8FS-C20012 Power Supply – Technical Specifications

SpecificationValue
Power rating200W
Output voltage12V
Rated output current17A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC254-373 V
Mounting methodDirect mounting
TypeMetal frame
Efficiency87%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height50mm
Width112.5mm
Depth212mm
FeaturesTerminal block facing upward
Allowable supply voltage AC90-264 V

The Omron S8FS-C20012 Power Supply provides 200 W rated power with a 12 VDC output and 17 A rated current for higher-current industrial loads. It uses single-phase input, direct mounting, and screw terminals for fixed panel installation. Rated input voltage is 100 to 240 VAC, while allowable ranges extend from 90 to 264 VAC and 254 to 373 VDC. The metal-frame unit has a stated efficiency of 87%. Its enclosure measures 50 mm wide, 112.5 mm high, and 212 mm deep, with the terminal block facing upward. These specifications define a 12 VDC configuration where output capacity, panel surface, enclosure depth, incoming supply, and conductor clearance should all be considered.

The connected equipment should require 12 VDC and have combined current demand within the 17 A rating. Direct mounting requires enough fixed panel area, while the 212 mm depth affects enclosure fit. The upward-facing terminal block also needs adequate space for wiring. For capacity comparison, keeping the nominal voltage at 12 VDC creates a clearer relationship between available wattage and current. For a higher-capacity direct-mount option that provides 350 W at 12 VDC with 29 A rated current, compare the Omron S8FS-C35012.