Omron S8FS-C15015D Power Supply
Omron S8FS-C15015D SMPS is a 150 W switch mode power supply designed to provide 15 VDC for industrial control equipment. It delivers 10 A rated output current and uses single-phase input, DIN rail mounting, and screw terminals for panel installation. Efficiency is 85% typical at 115 VAC input and 86% typical at 230 VAC input. Supported input ranges are 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. Within the S8FS-C Series, the S8FS-C15015D provides a DIN rail 150 W, 15 VDC configuration. Compare other 150W SMPS power supplies from Omron control equipment.

| Brand | Omron |
| Product | Power Supply |
| Model Number | S8FS-C15015D |
Omron S8FS-C15015D Power Supply - Technical Specifications
| Specification | Value |
|---|---|
| Power rating | 150 W |
| Output voltage | 15 VDC |
| Rated output current | 10 A |
| Terminal type | Screw Terminal |
| Mounting method | DIN rail |
| Connection | Terminal blocks |
| Efficiency | 85 % typ.(at 115 VAC input) 86 % typ.(at 230 VAC input) |
| Rated input voltage | Single phase 90 to 132 VAC , Single phase 180 to 264 VAC , 254 to 373 VDC |
| Rated input current | 2.8 A typ.(at 115 VAC input) 1.6 A typ.(at 230 VAC input) |
| Input Leakage current | 0.50 A typ.(at 115 VAC input) 0.75 A typ.(at 230 VAC input) |
| Input Frequency | 50/60 Hz |
| Output indicator | Yes (color: green) |
| Output voltage variable range | -10% to 10% (with V. ADJ) |
| Start-up time | 740 ms max.(at 115 VAC input) 730 ms max.(at 230 VAC input) |
| Hold time | 27 ms max.(at 115 VAC input) 31 ms max.(at 230 VAC input) |
| Vibration resistance | 10 to 55 Hz, 0.375-mm half amplitude for 2 h each in X, Y, and Z directions 10 to 500 Hz, 0.26-mm half amplitude for 1 h each in X, Y, and Z directions |
| Shock resistance | 150 m/s2, 3 times each in ±X, ±Y, ±Z directions |
| Ambient temperature (Operating) | -20 to 60°C |
| Ambient temperature (Storage) | -40 to 85°C |
| Ambient humidity (OperatingStorage) | 20% to 90% (Storage humidity: 10% to 95%) |
| Cooling fan | No |
| Weight | 500 g max. |
The Omron S8FS-C15015D Power Supply provides 150 W rated power with a 15 VDC output and 10 A rated current. It uses single-phase input, DIN rail mounting, screw terminals, and terminal blocks for structured panel installation. Efficiency is 85% typical at 115 VAC input and 86% typical at 230 VAC input. Supported input ranges are 90 to 132 VAC, 180 to 264 VAC, and 254 to 373 VDC at 50/60 Hz. A green output indicator provides operating status, while V.ADJ allows output adjustment from -10% to 10%. The fanless unit operates from -20 to 60°C and weighs up to 500 g. These parameters define the electrical capacity, mounting method, input conditions, and environmental context of the model.
The connected load should operate from 15 VDC and remain within the 10 A output rating. DIN rail mounting requires sufficient rail space, while screw terminals need suitable access for input and load wiring. The adjustable output permits limited trimming around the nominal value but does not change the fundamental 15 VDC class of the supply. When comparing capacity, a model using the same output voltage gives stronger context than one with a different voltage requirement. For a lower-power 15 VDC configuration rated at 50 W with 3.4 A output, compare the Omron S8FS-C05015.


