+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron S8FS-C05024 Power Supply

Omron S8FS-C05024 SMPS is a 50 W switch mode power supply designed to provide 24 VDC for industrial control equipment. It delivers 2.2 A rated output current and uses single-phase input, direct mounting, and screw terminals for fixed panel installation. The metal-frame unit has a stated efficiency of 86% and supports 100 to 240 VAC rated input, with allowable ranges of 85 to 264 VAC and 120 to 370 VDC. Its dimensions are 38 mm wide, 97 mm high, and 129 mm deep, with the terminal block facing upward. Within the S8FS-C Series, the S8FS-C05024 provides a direct-mount 50 W, 24 VDC configuration. Compare other 50W 24V power supplies from Omron control products.

Omron S8FS-C05024 Power Supply
BrandOmron
ProductPower Supply
Model NumberS8FS-C05024

Omron S8FS-C05024 Power Supply – Technical Specifications

SpecificationValue
Power rating50W
Output voltage24V
Rated output current2.2A
Terminal typeScrew
PhaseSingle
Number of output branches1
Allowable supply voltage DC120-370V
Mounting methodDirect mounting
TypeMetal frame
Efficiency86%
Temperature range-20-60?
Rated supply voltage at AC 50 Hz100-240V
Height38mm
Width97mm
Depth129mm
FeaturesTerminal block facing upward
Allowable supply voltage AC85-264V

The Omron S8FS-C05024 Power Supply provides 50 W rated power with a 24 VDC output and 2.2 A rated current for industrial control equipment. It uses single-phase input, direct mounting, and screw terminals for fixed installation inside electrical panels. Rated input voltage is 100 to 240 VAC, while allowable ranges extend from 85 to 264 VAC and 120 to 370 VDC. The metal-frame unit has a stated efficiency of 86%. Its enclosure measures 38 mm wide, 97 mm high, and 129 mm deep, with the terminal block facing upward. These specifications define how the power supply fits electrically and mechanically into a control panel where output voltage, current requirement, mounting surface, enclosure depth, and terminal access must be considered together.

The connected equipment should require 24 VDC and have combined current demand within the 2.2 A rating. Direct mounting differentiates this configuration from DIN rail versions and should be checked against the available panel layout before installation. The allowable AC and DC input ranges define the supported incoming supply conditions, while screw terminals provide fixed electrical connections. The 129 mm depth and upward-facing terminal arrangement should also be considered when planning enclosure and wiring clearance. For a higher-capacity direct-mount 24 VDC model rated at 150 W with 6.5 A output, see Omron S8FS-C15024J.