The Omron E6C3-CWZ3EH 800P/R 1M Rotary Encoder is an incremental shaft encoder used to obtain rotational feedback from industrial machine shafts. Its 800 P/R resolution with A/B/Z NPN voltage outputs generates incremental information that compatible control systems can use for position, direction, and speed-related monitoring. Operating from 5 to 12 VDC, the encoder incorporates a 50 mm diameter housing and a 1 m pre-wired cable for electrical connection. The 800-pulse resolution distinguishes this model from lower and higher pulse-count configurations while retaining the same output principle. The E6C3-CWZ3EH 800P/R belongs to the E6C3-C incremental encoder series. It sits within the wider A/B/Z rotary encoder range provided through Omron industrial automation products.
Operating: -10 to 70 ℃ (with no icing)
Storage: -25 to 85 ℃ (with no icing)
Degree of protection
IEC: IP65
Material
Case: Aluminum alloy
Accessories
Instruction manual
Weight
Package: Approx. 300 g
The Omron E6C3-CWZ3EH 800P/R 1M is part of the E6C3 Rotary Encoder range and is typically evaluated along with other Omron rotary encoders during panel design and motion control planning. Reviewing shaft type, resolution, output phase coding, control output stage, connector format, and cable arrangement helps ensure proper alignment with PLC high-speed inputs and mechanical coupling components. These compatible Omron encoder variants enable consistent wiring layouts, predictable pulse behaviour, connector alignment, and uniform signal performance across automation equipment. The E6C3-CWZ3EH 800P/R 1M integrates cleanly into modern industrial systems that require accurate, stable, and long-life rotary feedback devices, and is well suited for applications where a dependable Omron Encoders ensures reliable operation in demanding environments.
