Omron E3X-HD8 Fiber Optic Sensor
Omron E3X-HD8 is a PNP fiber amplifier designed to process optical signals from compatible fiber optic sensing heads for object detection. Its red 4-element LED operates at 625 nm, while digital tuning supports sensitivity setup according to sensing conditions. A wire-saving connector provides a compact electrical interface and supports reduced wiring in compatible multi-amplifier installations. The amplifier operates from 12 to 24 VDC and uses a polycarbonate enclosure with IP50 protection. Its PNP output provides the switching signal for compatible machine control inputs. The E3X-HD8 belongs to the E3X-HD Series within the fiber amplifier range from Omron sensing products, connecting digital fiber sensing with PNP machine control signals.

| Brand | Omron |
| Product | Fiber Amplifier Unit |
| Model Number | E3X-HD8 |
Omron E3X-HD8 Fiber Optic Sensor - Technical Specifications
| Specification | Value |
|---|---|
| Connection Method | Wire-saving Connector |
| Output | PNP |
| Light Source | Red, 4-element LED (625 nm) |
| Power Supply Voltage | 12 to 24 VDC ±10%, ripple (P-P) 10% max. |
| Materials | Polycarbonate (PC) |
| Degree Of Protection Ip | IEC 60529 IP50 |
| Ambient Illumination Receiver Side | Incandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max. |
| Ambient Temperature Range | Operating: Groups of 1 to 2 Amplifiers: −25 to 55°C, Groups of 3 to 10 Amplifiers: −25 to 50°C, Groups of 11 to 16 Amplifiers: −25 to 45°C Storage: −30 to 70°C (with no icing or condensation) |
| Ambient Humidity Range | Operating and storage: 35% to 85% (with no condensation) |
| Insulation Resistance | 20 MΩ min. (at 500 VDC) |
| Dielectric Strength | 1,000 VAC at 50/60 Hz for 1 minute |
| Vibration Resistance Destruction | 10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance Destruction | 500 m/s2 for 3 times each in X, Y, and Z directions |
The Omron E3X-HD8 Fiber Amplifier processes optical detection signals from compatible fiber sensing heads and provides a PNP switching output for machine control. Its red 4-element LED operates at 625 nm, providing the optical light source for the connected fiber sensing system. Digital tuning supports sensitivity setup according to sensing conditions, while the wire-saving connector provides a compact electrical interface for compatible multi-amplifier installations. The amplifier operates from 12 to 24 VDC ±10%. Its polycarbonate enclosure carries an IP50 protection rating, while the supplied ambient-light capability reaches 20,000 lx for incandescent lighting and 30,000 lx for sunlight. The important product relationships are PNP output, digital fiber amplification, wire-saving connection, red LED sensing, sensitivity tuning and object detection. These attributes provide stronger model-selection context than weight or secondary mechanical specifications. Within the E3X-HD Series, output polarity, cable or connector method and tuning approach help distinguish related fiber amplifier models. The E3X-HD8 therefore combines PNP signal processing with connector-based installation and digital sensing adjustment. For another supplied E3X-HD PNP fiber amplifier using an M8 connector instead of the wire-saving connector, the E3X-HD44 provides a relevant related comparison.

