+91 79955 44066
IndMALL: B2B Marketplace - We Connect Buyers & Sellers for Industrial Products

Omron E3X-HD41 2M Fiber Optic Sensor

Omron E3X-HD41 2M is a PNP fiber amplifier designed to process detection signals from compatible fiber optic sensor heads. A red 4-element LED operating at 625 nm provides the light source, while digital sensitivity adjustment supports setup according to the target and sensing conditions. The pre-wired 2 m cable simplifies connection to machine control wiring, and the amplifier operates from 12 to 24 VDC. Its polycarbonate enclosure provides IP50 protection for suitable industrial mounting locations. The E3X-HD41 belongs to the E3X-HD Series and functions as a PNP switching interface within the fiber optic sensing range from Omron sensing products, connecting fiber-head detection with machine control signals.

Omron E3X-HD41 2M Fiber Optic Sensor
BrandOmron
ProductFiber Amplifier Unit
Model NumberE3X-HD41 2M

Omron E3X-HD41 2M Fiber Optic Sensor - Technical Specifications

SpecificationValue
Connection MethodPre-wired Cable
Cable Length2 m
OutputPNP
Light SourceRed, 4-element LED (625 nm)
Power Supply Voltage12 to 24 VDC ±10%, ripple (P-P) 10% max.
MaterialsPolycarbonate (PC)
Materials CablePVC
Degree Of Protection IpIEC 60529 IP50
Ambient Illumination Receiver SideIncandescent lamp: 20,000 lx max., Sunlight: 30,000 lx max.
Ambient Temperature RangeOperating: Groups of 1 to 2 Amplifiers: −25 to 55°C, Groups of 3 to 10 Amplifiers: −25 to 50°C, Groups of 11 to 16 Amplifiers: −25 to 45°C Storage: −30 to 70°C (with no icing or condensation)
Ambient Humidity RangeOperating and storage: 35% to 85% (with no condensation)
Insulation Resistance20 MΩ min. (at 500 VDC)
Dielectric Strength1,000 VAC at 50/60 Hz for 1 minute
Vibration Resistance Destruction10 to 55 Hz with a 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock Resistance Destruction500 m/s2 for 3 times each in X, Y, and Z directions

The Omron E3X-HD41 2M Fiber Amplifier processes signals from compatible fiber optic sensing heads and provides a PNP switching output for machine detection systems. A red 4-element LED operating at 625 nm supplies the optical light source, while digital sensitivity adjustment supports setup according to target and sensing conditions. Unlike connector-type variants, this model uses a pre-wired 2 m cable, providing a direct wiring arrangement for machine installation. It operates from 12 to 24 VDC ±10% and uses a polycarbonate enclosure with an IP50 protection rating. The amplifier can operate under ambient illumination up to 20,000 lx from incandescent lighting and 30,000 lx from sunlight according to the supplied specifications. The important product relationships are PNP output, fiber amplification, digital tuning, pre-wired connection, optical signal processing and object detection. These attributes provide more useful product-selection context than secondary electrical or mechanical values. Within the E3X-HD Series, output polarity and connection method are strong differentiators between closely related amplifier models. For applications requiring the same PNP fiber-amplifier function with an M8 connector instead of a pre-wired cable, the E3X-HD44 provides the closest related model from the supplied range.