HMG10-T - SSI: Baumer Two-sided Bearing System With Hybrid Bearings
Technical Specifications of Baumer Two-sided Bearing System With Hybrid Bearings HMG10-T - SSI:
| Voltage supply | 4.75...30 VDC |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤100 mA (SSI) |
| Initializing time | ≤500 ms after power on |
Baumer Two-sided Bearing System With Hybrid Bearings HMG10-T - SSI Technical Specifications:
| Specification | Value |
|---|---|
| Voltage supply | 4.75...30 VDC |
| Short-circuit proof | Yes |
| Consumption w/o load | ≤100 mA (SSI) |
| Initializing time | ≤500 ms after power on |
| Interface | SSI |
| Function | Multiturn |
| Additional outputs | Square-wave TTL/HTL,TTL/RS422 |
| Sensing method | Magnetic |
| Diagnostic function | Function control |
| Status indicator | 4 LEDs in device back side |
| Switching accuracy | ± 2 % (or 1 Digit) |
| Switching outputs | 1 output (Open collector, solid state relay on request) |
| Output switching capacity | 30 VDC; ≤100 mA |
| Switching delay time | ≤20 ms |
| Size (flange) | ø105 mm |
| Shaft type | ø16...20 mm (through hollow shaft) |
| Flange | Support plate, 360° freely positionable |
| Protection EN 60529 | IP 66 / IP 67 |
| Operating speed | ≤12000 rpm |
| Range of switching speed | ns (off) = ±2...12000 rpm |
| Operating torque typ. | 10 Ncm |
| Rotor moment of inertia | 950 gcm² |
| Admitted shaft load | ≤450 N axial, ≤650 N radial |
| Material | Housing: aluminium alloy, Shaft: stainless steel |
| Operating temperature | -40...+95 °C |
| Relative humidity | 95 % non-condensing |
| Weight approx. | 1.6 kg (depending on version) |
| Connection | Terminal box, Flange connector M23 |
Mail Us for your needs in Baumer Two-sided Bearing System With Hybrid Bearings HMG10-T - SSI with budget-friendly prices. The Main Technical Parameters of HMG10-T - SSI, inludce voltage supply of 4.75...30 VDC and low power consumption of ≤100 mA (SSI) without load. These encoders use Magnetic sensing for accurate performance and come in a ø105 mm flange size. With an IP 66 / IP 67 protection rating according to EN 60529, they are ideal for harsh environments. The operating speed reaches up to ≤12000 rpm, and the typical operating torque is 10 Ncm, ensuring smooth and reliable operation. The encoders feature a durable Housing: aluminium alloy, Shaft: stainless steel shaft for added strength. Connection options include an Terminal box, Flange connector M23 output. Customize Your Experience with a Quote for your requirement of Baumer Two-sided Bearing System With Hybrid Bearings. Experience the difference with our competitive pricing and superior support over other Suppliers.
